Aleratec 260155 Hızlı Başlangıç Kılavuzu - Sayfa 2
Disk Çoğaltıcı Aleratec 260155 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Aleratec 260155 2 sayfaları. Dvd/cd stand-alone duplicators
Sayfayı Yazdır
Quick Summary of Operation
LCD Display Panel
displays a menu of
functions and
messages
Stand Alone Duplication
• Use the arrow buttons to select the Copy function.
Place the source DVD or CD in the upper drive.
Place a blank DVD-R/RW, DVD+R/RW, CD-R, or
CR-RW disc in the lower drive. After the lower
drive detects the blank disc, press the ENT button to
start copying.
• When Copy is completed, a good disc copy will be
ejected automatically. Failed discs will remain in the
lower drive and can be ejected manually. (Default
setting: a good disc will be ejected. This can be
changed; see the Setup section of the User Guide.)
For continuous duplication, reload blank discs into
the lower drive and repeat the procedure.
Technical Support Addresses and Phone Numbers
By e-mail: [email protected]
By Telephone: 1-818-678-0484
The Aleratec Technical Support Group can be reached between the hours of 8:30 a.m. and 5:30 p.m., Pacific Time,
Monday through Friday, excluding U. S. holidays.
Please try to call from a phone that is near your computer system.
Access is available 24 hours a day, 365 days a year, via:
The World Wide Web at: www.aleratec.com
FAX at: 1-818-475-5203
© 2007 Aleratec, Inc.
Execute
the
function
Menu
selected
scroll up
Cancel the
Menu scroll
function
down
selected
• A failed disc will remain in the lower drive (Default
setting: A failed disc is NOT ejected. To manually
eject a disc, press the ENT button to eject a failed
disc or press the eject button on the drive to eject
the disc.
External DVD/CD Recorder/Labeler
• Connect the USB cable (included) to the USB port
on the back of your duplicator and to an empty
USB port on your computer.
• Power on your duplicator. The display should show:
USB
D1 Mult
If you do not see this display, refer to the USB
section of the User Guide.
• Install the included Nero software (and USB drivers
if you are using Windows 98 SE).
• Launch the Nero software and select the desired
recording function. Insert appropriate media into
the DVD/CD-Recorder, and follow the display
prompts to record.
LightScribe Disc Labeling (P/N 260156
only)
• Place a LightScribe-certified disc with a blank label
(label side down, data recording side up) in the
DVD/CD Recorder.
• Launch the Label Maker software and you will find
"Print LightScribe Label."
• Select a label type, design your label, then print it.
L.H. Mode
D2 Mult
P/N 9299033 Rev. A