DRI Eclipse Talimatlar Kılavuzu - Sayfa 6

Aksesuarlar DRI Eclipse için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. DRI Eclipse 11 sayfaları.

can help the moisture reach the Urosensor

Diapers that include an absorbent gel layer should be avoided as these will not

result in sufficient moisture getting to the Urosensor

'Priming': preparing your child to use the alarm

To help your child use the alarm it is recommended that you practise what to do

when the alarm triggers during the night. This is called 'Priming'.

Priming is based on a strategy called Prospective Memory which is setting

something up in the brain that has to be remembered in the future. In order

to prime your child's brain to wake to the sound of the alarm, it is a matter of

practising what she or he needs to do when the alarm goes off.

Before your child settles down to go to sleep have him or her lie in bed

pretending to be asleep. Switch the alarm on and trigger it by putting something

metal across the black sensing strips on the orange Urosensor

to get up, switch the alarm off and go to the bathroom.

Practise this three or four times so that your child's brain is more ready to

respond when she or he hears the alarm.

At the outset you may also need to get up when the alarm sounds in the night

to ensure your child follows this procedure. Also, depending on your child's

age, you may need to assist him or her in preparing the Urosensor

We recommend that parents do this every night until the child is successfully

responding to the feeling of a full bladder and waking to go to the bathroom

before the alarm sounds. This may take a week or two, but in the end it will be

worth it.

How to pair the Urosensor

When you purchase a new Urosensor

alarm base. If you purchase a replacement or additional alarm base, you will also

need to pair that with the existing Urosensor

To pair your devices follow these instructions:

1. Switch on the alarm base, and using a thin probe (such as the end of a

paper-clip or very small screwdriver), press the pairing button marked Z

(see diagram in the section entitled DRI Sleeper

before it is absorbed by the diaper.

™

with an alarm base

™

you will need to pair it with your existing

™

eclipse Alarm).

– 6 –

to enable it to trigger.

. Ask your child

™

for re-use.

™