Advanced Navigation Poseidon Referans Kılavuzu - Sayfa 10

Anten Advanced Navigation Poseidon için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Advanced Navigation Poseidon 12 sayfaları.

5.3

Connector Maintenance

Care should be taken not to over tighten the Poseidon connector. Tools should not be used when

tightening the connector, it should only be tightened by hand.

The coaxial connectors are only pressure rated when they are mated. When the connectors are

unmated, be careful not to allow dirt, water or any other foreign matter to get into the connector. If

the connectors are going to be unmated for any extended period of time, please use the sealing

cap provided.

If the connector becomes dirty or dusty it should be cleaned using cotton swabs with alcohol and

dried with compressed air. Do not use scraping tools to clean the connector as these are likely to

damage sealing surfaces. Always re-apply silicon grease to o-rings after cleaning to ensure smooth

contact during mating.

5.4

The bulkhead coaxial connector for mating with the Poseidon antenna is shown below in

Illustration 4. This connector is purchased separately by contacting Advanced Navigation sales.

Advanced Navigation's Sublocus range of subsea navigation systems are equipped with the

mating coaxial connector for Poseidon. Illustration 4 shows the dimensions of this connector.

The connector assembly is supplied with a Male SMA connector on the oposite end. By request

this connector can be changed to other types. Please contact Advanced Navigation sales to

request other options.

Poseidon Reference Manual

Page 9 of 11

Version 2.0

17/12/2016