Aleratec 280110 Hızlı Başlangıç Kılavuzu

Disk Çoğaltıcı Aleratec 280110 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Aleratec 280110 6 sayfaları.

Quick Start Guide

DVD/CD RoboRacer LS™

Included Items

• 1 DVD/CD RoboRacer LS

• 1 Disc Output Bin Holder

• 1 100-Disc Capacity Disc Output Bin

• 1 50-Disc Capacity Disc Output Bin

• 4 100-Disc Capacity Guide Rods

• 4 50-Disc Capacity Guide Rods

Key Items on the DVD/CD RoboRacer LS

1. Clear Plastic Disc Guide Rods

2. Power and Function Indicator LED

3. LightScribe DVD Recorder

4. Disc Tray Control Arm

Installing the Hardware

1. Remove the DVD/CD RoboRacer LS from the box and place it on a level surface.

2. Connect the power cord to the power adapter and plug the power cord into a 110-volt AC power outlet. Plug in the cord from the

power adapter to the rear of the DVD/CD RoboRacer LS.

3. Attach the DVD/CD RoboRacer LS to your PC with the included USB cable.

4. Slide the bin holder into the slot on the left side of the RoboRacer LS case and place a disc output bin into the bin holder.

5. Place the clear plastic disc guide rods in the four holes on the top of the unit.

Note: For more detailed information, please read the User Guide found on the Aleratec software CD.

Installing the Software

1. Insert the Aleratec software CD into the DVD/CD drive in your computer.

2. Install the USB Driver, RoboRacer LS Utility, and LightScribe software.

3. Remove the Aleratec software CD from your computer's DVD/CD drive and insert the Nero 7 Essentials software CD.

4. Install Nero 7 Essentials, using the "Custom" option to install only "Nero Express" and "Nero Cover Designer."

Part No. 280110

• 1 USB 2.0 Cable

• 1 Power Cord with Switch

• 1 External Power Supply

• 1 Disc Publishing Software Suite CD

• 1 Nero 7 Essentials CD

5. Disc Input Bin

6. Protective Cover

7. Disc Bin Holder

8. Disc Output Bin

A. Power Plug

B. High Performance Cooling Fan

C. USB 2.0 to the PC