Atlantic Technology 3.1 HSB Kullanım Kılavuzu - Sayfa 10
Konuşmacılar Atlantic Technology 3.1 HSB için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Atlantic Technology 3.1 HSB 12 sayfaları. High performance front channel speaker base with powered h-pas subwoofer
Sayfayı Yazdır
10
Specifi cations
Specifi cations
Front Channels
Woofers (6)
Heavy-duty 3 1/2" (115mm) composite paper cone
Tweeters (3)
3/4" (19mm) soft dome, Ferrofl uid cooled
Frequency Response
125Hz-20kHz
Nominal Impedance
6 Ohms per channel
Crossover frequency
3.75kHz, 2nd order
Sensitivity
89dB
Recommended
10 - 150 Watts RMS per channel
Amplifi er Power
Magnetic Shielding
No
Powered Subwoofer
Subwoofer
Down fi ring 6 1/2" (165mm) long-throw composite paper cone
Amplifi er Power
Internal; 80 Watts RMS <.2% distortion
Frequency Response
35 Hz - 220 Hz
Peak Output
106dB SPL
Input (1)
RCA line level
Power Requirements
110-240V, 50/60Hz 2.5A (24VDC 4A Power Supply included)
System
Dimensions
35 3/4" x 4 3/4" x 16 3/4" (including grille)
(WxHxD)
910mm x 120mm x 426mm
Weight
29 lbs.
IMPORTANT NOTE:
The power recommenda on for this speaker assumes that you will not operate your amplifi er/receiver in a way that produces
distor on. Even rugged speakers like ours can be damaged by an amplifi er driven into audible distor on. The harsh amplifi er
distor on ("clipping") that occurs in this situa on will eventually cause damage to the speaker system. This type of damage may
be cumula ve and can build up over me, as the amplifi er is driven into overload again and again. Such damage is easily iden fi -
able through examina on of the damaged speaker's voice coil and is not covered by the warranty
Specifi ca ons are those in eff ect at the me of prin ng. Atlan c Technology Interna onal, Corp. reserves the right to change
specifi ca ons or designs at any me without no ce and without obliga on to modify exis ng units.
3.1 HSB Speaker Base System with H-PAS