Atlantic Ultraviolet Sanidyne PREMIUM Kullanıcı El Kitabı - Sayfa 12
Aksesuarlar Atlantic Ultraviolet Sanidyne PREMIUM için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Atlantic Ultraviolet Sanidyne PREMIUM 20 sayfaları. Germicidal ultraviolet portable area sanitizer
NOTE: Once you select the start button an audible exit alarm will begin to sound and the Sanidyne
counting down from 1:30 seconds to allow all inhabitants to leave the area before the UV treatment begins. The words
"Leave Area" will now appear on the lower status bar of the Hand-held Remote Controller. (See Figure 4, for the specific
location). The Occupancy Sensors located on the top of the unit (Shown on Figure 1) will begin to operate at this time,
providing an additional safety area around the unit. If the sensors detect movement close to the Sanidyne
when less than 30 seconds remains on the countdown time, the Sanidyne
seconds more to leave the Operation Area. The Countdown time as well as the Treatment Time will all be displayed on the
Hand-held Remote Controller. See Figure 4, for the specific location.
Occupancy Sensors do not protect the entire Operation Area of the Sanidyne
circumstances should this sanitizer be permitted to operate with human, or animals present in the Operation Area.
4.
The Hand-held Remote Controller displays the Lamp Status; When the lamp operation indicators on the display glow yellow
the lamp is on, when the lamp is off it displays grey. (See Figure 4 to locate lamp operation indicators) Once the treatment
time has expired the unit will turn off the Germicidal Ultraviolet Lamps and it is now safe to return to the area.
If at any time during the Treatment Time the Occupancy Sensors detect someone near the
Sanidyne
Premium, the fixture will immediately turn off and send an alarm to the Hand-held Remote Controller and
®
the Sanidyne
Premium. If this event occurs the alarm can be turned off on the remote by pressing anywhere on the
®
display or at the Sanidyne
Sanidyne
Premium the operator can reset the fixture by pressing the START/STOP button on the keypad controller
®
again to begin the 1:30 countdown to allow all inhabitants to leave the area. After the 1:30 has elapsed the Sanidyne
Premium will power on and complete the remaining Treatment Time left prior to the alarm.
If the Hand-held remote is used to stop the alarm, the operator must return to the area and ensure that the area is safe
to proceed. Select the START/STOP button on the keypad controller to begin the 1:30 countdown to allow all inhabitants
to leave the are. After the 1:30 has elapsed the Sanidyne
Treatment Time left prior the alarm.
s
d
etting
ate and
Option 1 – Using the tablet's Settings menu:
1.
Navigate to the tablet's settings menu by tapping the Settings icon on the Home Screen or in the App Directory.
Scroll down to Date & Time under System.
2.
3.
Use the Set Date, Set Time, and Select Time Zone functions to set the correct date and time.
Option 2 – If starting in the LampControl app Settings menu:
Press the Settings Button. (See "Hand-Held Remote Controller Overview" on pages 8–9.)
1.
2.
Press Set Date/Time.
Press Admin Pin. Using keyboard, enter Pin number 1234. (This will bring you to the tablet's Settings menu.)
3.
4.
Scroll down to Date & Time under System.
Use the Set Date, Set Time, and Select Time Zone functions to set the correct date and time.
5.
s
s
aving a
ession
Saving a Session: At the end of a Session or after a Session is Stopped the "Save This Session" box will appear.
To save a Session:
Press Yes under Save Session.
1.
2.
Press on Note Entry
Type in Session Notes, press OK
3.
Clearing Total Operating Time or Clearing Session Data:
1.
Press Settings Button
Press Settings
2.
3.
Press on the box next to "Reset Total Operating Time" and /or "Clear Session Data."
Press Home Button.
4.
12
Premium by pressing the START/STOP on the Keypad. If the Alarm is turned off at the
®
t
ime
Premium will automatically reset giving 30
®
Premium will power on and complete the remaining
®
Premium will begin
®
Premium
®
Premium. Under no
®
®