Electrolux MCH 662 Talimat Kitabı - Sayfa 11

Havalandırma Davlumbazı Electrolux MCH 662 için çevrimiçi göz atın veya pdf Talimat Kitabı indirin. Electrolux MCH 662 22 sayfaları.

Please ensure that when the appliance is installed

it is easily accessible to an engineer in the event of

a breakdown.

All installations must comply with the local

authorities requirements for the discharge of

exhaust air.

Incorrect installation may affect the safety of

this cooker hood.

Before installation check the wall to which the

cooker hood is to be fitted for electric cables,

water pipes or gas.

If it is necessary to fix the hood to a hollow

construction plaster or partition board structure then it

should be sufficiently reinforced to be quite rigid in the

area of the cooker hood mounting brackets, and the

appropriate rawl plugs used for this type of fixing (not

supplied).

Ducting

The ducting must be fire retardant 100mm (4"ins) in

diameter and the length should be no more than:

3 metres with one 90° bend

2 metres with two 90° bends

Bends of more than 90° will reduce the efficiency of the

hood and reduce the airflow.

Clearance Height

The cooker hood is designed to be fitted over a

cooking appliance at the clearance heights stated,

providing the maximum output of the appliance

beneath does not exceed the maximums quoted in the

Technical Specifications.

If the output of the appliance below the cooker hood

exceeds the maximum outputs quoted, please refer to

the cooker manufacturer's installation instructions.

INSTALLING THE COOKER HOOD

1 1