Electrolux RH30WC40GS Kurulum, Kullanım ve Bakım Kılavuzu - Sayfa 8

Havalandırma Davlumbazı Electrolux RH30WC40GS için çevrimiçi göz atın veya pdf Kurulum, Kullanım ve Bakım Kılavuzu indirin. Electrolux RH30WC40GS 19 sayfaları. Universal/multiflex
Ayrıca Electrolux RH30WC40GS için: Broşür ve Teknik Özellikler (2 sayfalar), Fabrika Parça Kataloğu (4 sayfalar)

Sayfayı Yazdır

Electrolux RH30WC40GS Kurulum, Kullanım ve Bakım Kılavuzu

1. Filters

Installing the hood

8 8 8 8 8

Examples of possible ducting

Ductwork installation guidelines

For safety reasons, ducting should vent directly

outdoors (not into an attic, underneath the house,

into the garage or into any enclosed space).

Keep duct runs as short and straight as possible.

Duct fittings (elbows and transitions) reduce air flow

efficiency.

Back to back elbows and „S" turns give very poor

delivery and are not recommended.

A short straight length of duct at the inlet of the

remote blower gives the best delivery.

Transition to duct from the integral blower or remote

duct transition as close to the downdraft as is pos-

sible.

In order of preference, use

1st. 10" round duct

2nd. 8" round duct

3rd. 3-1/4" x 14" duct

4th. 7" round duct

5th. 3-1/4" x l0" duct

6th. 6" round duct

The use of flexible metal round duct should only be

used when no other duct fitting exists. Limit use to

short lengths and do not crush when making

corners.

Recirculating

Recir

culating

V V V V V ertical discharge

ertical discharge

Horizontal discharge

After having choosen the vent option, proceed as

After having choosen the vent option

follows:

Step 2

Remove the round transition from its seat by

unscrewing the its fixing screws (save the screws).

7" Round

Transition

Step 3

Remove the grease filters.