Bosch 2 Kurulum ve Kullanım Kılavuzu - Sayfa 2

Elektrikli Süpürge Bosch 2 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Bosch 2 18 sayfaları. Mini blender
Ayrıca Bosch 2 için: Hızlı Kurulum Kılavuzu (16 sayfalar), Orijinal Talimat Kılavuzu (13 sayfalar), Orijinal Talimat Kılavuzu (22 sayfalar), Kullanım Kılavuzu (32 sayfalar), Kullanıcı Kılavuzu (28 sayfalar), Kullanım Kılavuzu ve Kurulum Talimatları (16 sayfalar), Kullanım Kılavuzu (42 sayfalar), Kullanım Talimatları Kılavuzu (8 sayfalar), Kullanım Kılavuzu (8 sayfalar), Kullanım Kılavuzu (12 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (9 sayfalar), Kullanım Kılavuzu ve Kurulum Talimatları (36 sayfalar), Kullanım Kılavuzu ve Kurulum Talimatları (48 sayfalar), Kullanım Talimatları Kılavuzu (26 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kullanım Kılavuzu ve Kurulum Talimatları (24 sayfalar), Kullanım Kılavuzu (42 sayfalar), Kullanım Bilgileri (28 sayfalar), Kullanıcı Kılavuzu (40 sayfalar), Kullanım Kılavuzu ve Kurulum Talimatları (35 sayfalar), Kullanıcı Kılavuzu (24 sayfalar)

Bosch 2 Kurulum ve Kullanım Kılavuzu
BTEXACT_bu_3609929A44_t.fm Seite 1 Montag, 5. September 2005 2:12 14
FOR ALL BATTERY-OPERATED TOOLS
Read all instructions. Failure to
follow all instructions listed below
may result in electric shock, fire
and/or serious injury. The term "power tool" in all of
the warnings listed below refers to your mains oper-
ated (corded) power tool or battery operated (cord-
less) power tool.
Save these instructions.
Work area
Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
Electrical safety
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords in-
crease the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
Personal safety
Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medica-
tion. A moment of inattention while operating power
tools may result in serious personal injury.
3 609 929 A44 • (05.09) T

1 GENERAL SAFETY RULES

Use safety equipment. Always wear eye protec-
tion. Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
Avoid accidental starting. Ensure the switch is
in the off position before plugging in. Carrying
power tools with your finger on the switch or plugging
in power tools that have the switch on invites acci-
dents.
Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may re-
sult in personal injury.
Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the
power tool in unexpected situations.
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
these devices can reduce dust related hazards.
Power tool use and care
Do not force the power tool. Use the correct
power tool for your application. The correct pow-
er tool will do the job better and safer at the rate for
which it was designed.
Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
Disconnect the plug from the power source be-
fore making any adjustments, changing acces-
sories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power
tool accidentally.
Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool's operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
English–1