DRIFTON 206-DAB-ES 1203 Kullanım Kılavuzu - Sayfa 6
Dağıtıcı DRIFTON 206-DAB-ES 1203 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DRIFTON 206-DAB-ES 1203 11 sayfaları. Double syring liquid dispenser
Sayfayı Yazdır
1. Connect the air input hose to a plant air source. Set plant air supply within 80 to 100 psi.
2. Attach the air input hose coupling to the dispenser.
3. Plug in the polarized foot pedal connector. Connect the foot pedal to the back of the dispenser
4. Check the voltage label on the input voltage selector cartridge. Connect the power cord into the back
of the dispenser. Connect the power cord into your local power source (AC110V-220V / 50Hz).
5. Insert the tube end of the valve to the dispenser. The other tube assembly into the front of the
dispenser.
6. Take the liquid material and fill the barrel. Insert the piston down into the barrel.
7. Take the barrel and attach the valve, fixate it, and then attach the mixing Nozzle. If you want to have
a small volume, you can connect the needle.
8. Note: Always use the lowest possible pressure and the largest possible tip size. The combination of
the lowest possible output pressure + largest possible tip size + longest possible dispense duration =
most consistent and accurate deposits.
9. During the initial testing, you will not use the vacuum control. Keep this control shut off (turned
completely clockwise—do not force).
Dispenser Hookup
6