Drija BARI 30 Kullanıcı Kılavuzu - Sayfa 11

Soba Drija BARI 30 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Drija BARI 30 12 sayfaları. Built-in electric stove
Ayrıca Drija BARI 30 için: Kullanıcı Kılavuzu (14 sayfalar)

Sayfayı Yazdır

7. ELECTRICAL CONNECTION

Fitting Guide lines

The electric hob is manufacture to work with single-phase alternating current (220V-

240V/50Hz)

The connection diagram is also on the cover of the connection box.

All electrical work should be carried out by a suitably qualified and authorized

electrician. No alterations or willful changes in the electricity supply should be carried

out.

The connection cable must be secured in the strain – relief clamp

Connecting the hob to the mains power supply

User Manual

ELECTRIC STOVE BUILT-IN | BARI 30

The electricity supply for the electric hob must

have an isolation switch which enables the power to be

cut off in case of an emergency and for maintenance.

The distance between the working contacts of the

isolation switch must be at least 3mm.

Before connecting the electric hob to the mains power

supply it is important to read the information on the

data plate and the connection diagram.

Voltage of heating elements 220V – 240V

3X1.5 mm2

This artifact must be earthed

For this connection a power lead of wire type

H05RR-F should be used.