Electrolux 70 Kullanım Kılavuzu - Sayfa 6

Elektrikli Süpürge Electrolux 70 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Electrolux 70 14 sayfaları. Electrolux hand held vacuum cleaner owner's guide
Ayrıca Electrolux 70 için: Kullanıcı El Kitabı (9 sayfalar)

Sayfayı Yazdır

Safety apparel:

Approved boots

Choke closed

(Hot ignition)

B - Description of the safety devices on the machine, Controls and

maintenance necessary to ensure safe conditions

WARNING! Never use the machine for any reason with its safety devices out of order

• This section describes the safety devices

installed on the machine, the controls and

maintenance to perform to keep them in perfect

working order.

• The general description section will help you to

identify the parts described in this section.

• The risk of accidents is greatly increased if

maintenance is not performed regularly or is not

performed professionally. In case of doubts,

contact an authorized service center.

B1 Safety lever

• This device was developed to prevent acciden-

tal pressing of the throttle control trigger A. The

trigger A only works if it is pressed at the same

time as the safety lever B. When the handle is

released, two separate springs return the throt-

tle trigger A and the safety lever B automatically

to their original positions.

B1 Stop button

• When the Stop button C is pressed in the direc-

tion indicated by the symbol, the engine shuts

down.

• To check correct operation, start the engine and

make sure it shuts down when the Stop button

C is switched to the Stop position.

B2 Blade guide

• The blade guide (A) is an important device

developed to prevent accidental contact

between parts of the body and the blades.

• Periodically, check the conditions of the device

and have it replaced, if necessary, by an author-

ized service center.

B3 Hand guard

• The hand guard (B) prevents any accidental

contact of the hands with the blade unit.

ENGLISH - 2

Do not smoke when

refueling or using the

machine

Choke open

(Cold ignition)

• Periodically, and always after any violent impact

to the guard, check its conditions.

B3 Safety lever on front handle

• This hedge trimmer is equipped with a safety

device (C) that greatly reduces the risk of acci-

dents, because if the machine is not gripped

with both hands, this safety device prevents the

engine from racing even if the accelerator is

pressed all the way down, and holds the blades

locked.

• To check correct operation of this important

device, try to press the accelerator all the way

down without gripping the front handle.

Normally, the engine should not race and the

blades should not move, otherwise the device

is not working correctly and the machine should

be taken promptly to a service center.

B4 Vibration damping system

• The vibration damping system reduces the

transfer of vibrations by means of springs and

shock absorbers in rubber located between the

engine/blades and the handles on the machine.

• Check regularly that the springs and rubber

shock absorbers are properly mounted and do

not exhibit any cracks or distortion.

B5 Muffler

• The muffler is designed to keep noise levels to a

minimum and to direct the engine exhaust

fumes away from the user.

• Comply with the following procedures for safe

use of the hedge trimmer.

•

CAUTION! The muffler can get very hot

during use and remain so for some time after

stopping. Contact of the area around the

muffler can result in burns to the skin.