Electrolux EL4012A Kullanıcı El Kitabı - Sayfa 14

Elektrikli Süpürge Electrolux EL4012A için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Electrolux EL4012A 20 sayfaları.

HOW TO CLEAR A BLOCKAGE AND MAINTAIN FLOOR NOZZLE

ENGLISH

CAUTION: Always unplug vacuum cleaner

before cleaning hose or nozzle.

The vacuum cleaner may stop automatically

if the nozzle, wand, dust bag or filters

become blocked. If this happens, unplug

and allow the vacuum to cool for 20 to 30

minutes.

1. Use a rod or similar blunt implement to

Clearing the wand and hose

clear a blockage in wand or hose.

2. Sometimes an obstruction can be cleared

by squeezing or flexing the hose. Use

extreme care if there is a risk that glass,

nails or other sharp objects could be

imbedded in the hose.

Note: Warranty does not cover any damage

to the hose caused by cleaning it.

3. Clean hard floor and rug nozzle frequently

to avoid deterioration of suction power.

Use crevice tool to remove dust balls, hair

or objects that may be entangled.

4. Clean turbo nozzle by vacuuming with

crevice tool. Use scissors to snip threads

or hair entangled in the brush roll, then

vacuum away.

Use handle at lower front edge of canister

to carry.

1. When you pause during cleaning, park

floor nozzle by slipping ridges into slot

on back of canister.

2. Use alternate parking position when

vacuum is stored on end.

3. For storage, press hose into clip on

tool caddy.