Bosch BDU3360 Kullanıcı El Kitabı - Sayfa 9

Elektrikli Süpürge Bosch BDU3360 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Bosch BDU3360 32 sayfaları. Drive unit
Ayrıca Bosch BDU3360 için: Orijinal Kullanım Talimatları (45 sayfalar), Orijinal Kullanım Talimatları (47 sayfalar), Orijinal Kullanım Talimatları (23 sayfalar), Orijinal Kullanım Talimatları (32 sayfalar)

Checking the speed sensor (see figure A)

(3)

(1)

(1) Speed sensor

(2) Spoke magnet

(3) CenterLock magnet

(4) Rim magnet

a) Different sensor shape and installation position possible

b) a different installation position is possible

Speed Sensor (slim)

The speed sensor (1) and its CenterLock magnet (3)

or spoke magnet (2) are mounted ex works in such a

manner that the magnet, after a turn of the wheel,

moves past the speed sensor with a clearance of at

least 2 mm, yet no more than 15 mm.

The correct distance between the magnet and sensor

must be maintained (see figure A) if design changes

are made.

Notes: Ensure that you do not damage the sensor or

sensor bracket when fitting or removing the rear

wheel.

When changing a wheel, make sure that the sensor

cable is routed so that it is not under tension and has

no kinks.

The CenterLock magnet (3) can only be removed and

reinserted up to five times.

Rim magnet

When installing a rim magnet, no sensor is required to

detect a wheel turn. The drive unit itself detects when

Bosch eBike Systems

(2)

(4)

Assembly

the magnet is close to it and calculates the speed and

any other data required from the frequency of the

emergence of the magnet field.

Since the drive unit is sensitive to magnetic fields,

avoid other magnetic fields in the vicinity of the drive

(1)

unit (e.g. magnetic clipless pedals, magnetic cadence

sensors, etc.) in order to prevent disruption to the

drive unit.

English – 7

0 275 U07 3D2 | (21.03.2022)