Drill Master MD1 Kullanım Talimatları Kılavuzu - Sayfa 5

Öğütücü Drill Master MD1 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Drill Master MD1 16 sayfaları. Grinding machine

1.1.4 Personal Safety Equipment

- Wear appropriate protective clothing when working with the machine.

- Wear closely fitting clothing when operating the machine.

- Operators with long hair must wear a hair net.

- No protective gloves

- Wear safety goggles when operating the machine.

1.1.4 Safety during Repair and Maintenance

Before starting with maintenance and repair works, switch off main circuit breaker and lock to avoid

restoration of power.

- Maintenance and repairs must only be carried out by authorized specialists. In this context

special note should be taken of the dangers when working on electrical system.

- The relevant accident prevention and safety regulations as well as the information in the

machine documentation and the supplementary documentation must be observed.

- Immediately renew damaged or removed information and warning signs as well as safety

inscriptions.

- After completed repairs, correctly refit all removed guards. Unauthorized conversions or

changes to the machine impair the safety of operating personnel and of the machine,

therefore they are strictly forbidden.

- After completed maintenance and repair to grinding machine, units or fixtures, the final

customer shall be responsible for the attachment and the function of the guards and other

safety installations as part of the overall safety of the machine.

1.1.6 Safety during Tool Change and Set-up

Prior to every tool change and during set-up work on the machine, the main motor must be switched off.

1.1.7 Behavior in an Emergency

In emergency situations immediately

- press the red emergency-off switch or (if available)

- pull the emergency-stop line.

1.2 Warning Plate

Persons entrusted with transport, storage, operation or maintenance and repair of the machine must be

familiar with the contents of the operating instruction manual. These instruction, particularly the safety

instructions ,must be obeyed.

In addition to the operating instructions, observe the valid general, statutory and other

regulations for the prevention of accidents and for environmental protection which are in force in the

DrillMasters Eldorado Tool, Inc.

Page 5 of 16