Atlas Strategy Series SM82-B Teknik Özellikler - Sayfa 2

Konuşmacılar Atlas Strategy Series SM82-B için çevrimiçi göz atın veya pdf Teknik Özellikler indirin. Atlas Strategy Series SM82-B 3 sayfaları. Strategy series surface mount loudspeakers

Sayfayı Yazdır

Care should be taken to ensure that the chosen fixing point is strong

enough to support the SM82. Care should also be taken to ensure

that the SM82 is not exposed to direct precipitation. A

hole is provided on the C-bracket to allow the SM82 series speaker to

be mounted on any Atlas Sound microphone stand for near-field live

sound applications. Four brass inserts are also provided on the bottom

of the SM82 to accommodate OMNIMOUNT™ 75 series brackets. All

inserts for mounting knobs are standard

of off-the-shelf vandal proof torx head or "one-way" hardware. Input

connectors include a sealed

⁄

binding posts capable of accepting up to #12AWG cable.

binding posts are paralleled to allow "daisy chain" connections

between the two connector types.

A tongue-in-groove cover with rubber wire exit grommet is provided to

insure input connections are protected. Systems are available in black

or white and can be painted to accommodate any architectural

considerations.

ARCHITECT AND ENGINEER SPECIFICATIONS

The indoor/outdoor mini-loudspeaker system shall be Atlas Sound

Model __________ (SM82-B or SM82-W) or approved equal.

FUNDAMENTAL

HARMONIC

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 / FAX (800) 765-3435

⁄

"-27 threaded

⁄

"-20 to allow easy substitution

" phone jack and touch-proof 5-way

⁄

" jack and

SM82 Frequency Response

(Transformer Bypassed)

SM82 Harmonic DIstortion

Specifications subject to change without notice

Printed in U.S.A.

Assemblies shall consist of 2-way woofer, and tweeter, within

environment-resistant housings. Enclosure shall be constructed

of paintable UV-resistant, talc impregnated, polypropylene, injection

molded plastic finished in black (SM82-B) or white (SM82-W).

Each unit shall include a stamped, powder coated aluminum grille

and removable C-shaped mounting bracket. All hardware inserts shall

be brass and threaded

a 8" (133mm) HYCONE™ treated woofer and a 1" exit compression

driver frequency device. The dividing network crossover frequency

shall be 2.5 kHz. The dividing network shall include protection circuits

for the high-frequency component. The loudspeaker system shall

meet the following performance criteria: Power handling, 150 Watts

RMS; Frequency response, ±3dB from 65 Hz to 20 kHz; Pressure

sensitivity, 92dB SPL at one watt, 100 Hz to 10 kHz measured at a

distance of one meter on axis. Impedance shall be 8 ohms nominal.

Input connectors shall include (1) sealed

touch-proof binding post. A tongue-in-groove cover with rubber wire

exit grommet shall be provided to protect the input connectors.

The loudspeaker system shall exhibit no performance or cosmetic

degradation after a 100 hour salt spray test per ASTM B117.

The unit shall be 16

⁄

FREQUENCY (Hz)

AtlasSound.com

000202

⁄

"-20. The 150 Watt RMS system shall have

⁄

" phone jack and (1) 5-way

" high x 9

⁄

" wide x 8

⁄

" deep.

1 6

SL1-1193