Atlas CP400 Broşür ve Teknik Özellikler
Amplifikatör Atlas CP400 için çevrimiçi göz atın veya pdf Broşür ve Teknik Özellikler indirin. Atlas CP400 10 sayfaları. Commercial dual channel power amplifiers
Ayrıca Atlas CP400 için: Kullanıcı El Kitabı (16 sayfalar), Kullanıcı El Kitabı (16 sayfalar), Kullanıcı El Kitabı (16 sayfalar)
Sayfayı Yazdır
Atlas Sound Infrared Repeater System & Devices
Micro Infrared Repeaters & Flashers
M-1A Series
Atlas Sound IR repeaters allow the operation of virtually any IR-controlled A/V component from multiple
room locations. The
M-1A
repeater will receive the IR signal and rebroadcast it to the small
on the front of each A/V component. The
These micro repeaters feature an attractive, flush, white lens that blends with any white surface. Their high sensitivity
enables use within a 40 foot range with fast reaction time and minimal interference. Repeaters are available installed
on a white decorator-style subplate (cover plate not included) or separately for flush-mounting in a ceiling, wall,
cabinet or speaker grille.
F-1 Series
Small
F-1
flasher LEDs are shipped with an adhesive backing and
all IR-controlled A/V components. Up to six flasher units may be connected to a single
connector blocks or any standard adapter (by others).
M-1CB4B
Note: some high-end A/V components are equipped to accept hard-wired IR signals. In this case, F-1 flashers would not be necessary.
Model
Description
M-1A
IR Repeater
M-1AJW
IR Repeater
F-1
Flasher
* Order Sound decorator-style cover plate separately.
** Order Model M-1A separately.
Stand-Alone IR Repeater System
M-1CB4B
For installation flexibility, the
that provides connections for an
figuration allows IR operation of up to four A/V components from up to four room locations. The
mini jacks for power supply Model
M-1A
repeaters (rooms) in parallel fashion and a data jack for connecting a mini-pin IR source or another M-1CB4B.
The unit's amplified circuit design supplies clear, strong IR data to source components.
This stand-alone IR repeater system requires: one
every four A/V components, a
PS-M12
which require control of more than four components or transmission from more than four rooms, multiple
blocks may be used.
Note: each M-1A repeater can control a maximum of six F-1 flashers.
A compact UL-listed 12VDC, 200 mA power supply with a 6' cord. The required input voltage is 120V. Supply
PS-M12
includes a
⁄
" mini-plug for direct connection to the
1
8
use with up to two switched WhisperTouch
Remote
Range:
Maximum 40'
at 30˚off axis.
800.876.3333
F-1
forwards the signal to the source component's IR receiver.
Current Draw
Style
12 mA
Flush Mount
12 mA
Wall Mount, Supplied on Decorator Subplate*
.05 mA
Surface Mount
M-1CB4B
amplified connector block is offered as a plug-in interface device
M-1A
Series repeater, four
F-1
flashers, and power supply Model PS-M12. This con-
PS-M12
and up to four
F-1
flashers; it also provides terminals for wiring up to four
M-1A
repeater in each remote room location, one
power supply, and one
F-1
M-1CB4B
connector block (powers up to four
volume controls.
®
F-1
flasher LED positioned
⁄
" phone plugs for connection to
1
8
M-1A
repeater using two
Color
White Lens
White Lens,
White Subplate
Black Lens, Black Cord
M-1CB4B
flasher for each A/V component. For installations
F-1
F-1
*(Shown with cover plate,
offers
⁄
"
1
8
M-1CB4B
for
M-1CB4B
flashers) or for
M-1AJW*
M-1A
Sold separately.)
M-1CB4B
PS-M12
57