Electrolux ZVE 4110FL Kullanım Talimatları Kılavuzu - Sayfa 7
Elektrikli Süpürge Electrolux ZVE 4110FL için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Electrolux ZVE 4110FL 40 sayfaları. Ergoclean bagless
Sayfayı Yazdır
WARNING: On collection of proprietary carpet
conditioning powders, plaster/concrete dust, it is
recommended that the dust container is emptied
and the cartridge filter is cleaned after every use.
Some of the preparations contain substances which
while left in the vacuum cleaner for extended
periods could create damage.
Many air fresheners, household deodorants,
sprays and polishes contain highly inflammable
gas propellants. Because of this it is particularly
important that these products are used strictly
in accordance with the relevant manufacturers
instructions. It is essential that none of the above
products are sprayed directly into the vacuum
cleaner or any of the filters, hose assembly or
dust chamber.
TROUBLE SHOOTING AND
CUSTOMER INFORMATION
You can perform your own troubleshooting
at home based on the checklist given below.
However, if the problem persists, please contact
Electrolux on 1300 365 305 (AUS)
or 0508 730 730 (NZ)
PROBLEM
Vacuum cleaner does
not start.
Filter indicator light
stays on.
Reduction of suction
capacity.
Over-heating.
MAINTENANCE / TROUBLE SHOOTING
POSSIBLE CAUSES
Plug is not properly connected
to the socket.
Thermal protector activated due
to high temperature.
Dust container is full.
Filters are clogged.
Suction hose is blocked.
Nozzle is blocked.
Dust container is full.
Filters are clogged.
Hose is damaged or broken.
Dust container is full.
Filters are clogged.
CORRECTIONS
Check the plug connection or try another socket.
Press the On/Off button and wait 20-30 minutes
for the motor to cool down.
Empty the dust container.
Clean or replace filters.
Clean the hose.
Clean the nozzle.
Empty the dust container.
Clean or replace filters.
Change the hose.
Empty the dust container.
Clean or replace filters.
6.