Electrolux ZVE 4120FL Kullanım Talimatları Kılavuzu - Sayfa 4
Elektrikli Süpürge Electrolux ZVE 4120FL için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Electrolux ZVE 4120FL 40 sayfaları. Ergoclean bagless
Sayfayı Yazdır
ASSEMBLING THE VACUUM CLEANER
GETTING STARTED,
ASSEMBLING ERGOCLEAN
1. Check the dust container is in place.
2. To connect the hose into the suction inlet
push it until it clicks.
To disconnect the hose form the suction inlet,
push the button at the end of the hose and
pull away from the cleaner.
3. Attach the telescopic tube to the hose handle
together. Twist and pull apart to dismantle.
4. Extend the cable and connect to mains power.
and ensure the cord is not twisted before use.
(Press foot pedal to rewind. Note: Please hold the
plug to prevent it striking you or the machine).
Filter indicator: before commencing cleaning,
plug the cleaner in and turn it on (without the
hose attached to the cleaner).
If the indicator is clear, attach the hose and all other
necessary attachments and commence cleaning.
*Certain models only
5.
6. By moving the variable power control,
the suction power can be adjusted.
Suction can also be regulated on the hose
handle by opening/closing the slide valve.
GETTING THE BEST CLEANING RESULTS
nozzles and accessories. Read below to learn more.
Dust Pro Nozzle
Id
For cleaning carpets, the brush strip should be in
the retracted position. To retract the brush strip,
press the pedal on the top of the nozzle.
the brush strip for soft cleaning.
to ensure gentle, scratch free cleaning.
3.