Atlas LR10 Manuel - Sayfa 4
Kaldırma Sistemleri Atlas LR10 için çevrimiçi göz atın veya pdf Manuel indirin. Atlas LR10 18 sayfaları.
Sayfayı Yazdır
2 Power Requirement
Power source must be over 2.2kw,source cable size must be over 2.5mm² and in good condition
of contacting with floor.
III. STEPS OF INSTALLATION
A. Check the Parts Before Assembly & make sure all the parts are completed.
1
Packaged lift, Parts box, Power Unit and Power Unit Stand. Move aside the parts, Open the
outer packing and check the parts according to the shipment parts list.
2
Open the parts box check the parts according to the part list
Fig. 3
Fig.4
4
.
(See Fig. 3)
.
(See Fig. 4)