Atlas ROCKFA62T Kurulum Talimatları

Hoparlör Sistemi Atlas ROCKFA62T için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Atlas ROCKFA62T 1 sayfaları. 6" strategy series rock landscape speaker system
Ayrıca Atlas ROCKFA62T için: Teknik Özellikler (3 sayfalar)

Sayfayı Yazdır

ROCKFA62T-BR WeATheR ResisTAnT

2-WAy OuTdOOR LOudspeAKeR sysTem

Thank you for choosing Atlas Sound for your Commercial Sound System needs. The ROCKFA62T-BR outdoor loudspeaker

is engineered to provide years of trouble free operation and enjoyment. Please read the following installation instructions

BEFORE connecting to your audio system.

Atlas Sound's ROCKFA62T-BR brings Strategy series sound quality to the great outdoors by packaging the proven performance

of model FA136 driver in a specially designed, natural looking, simulated stone enclosure. An internal 32 watt 70.7V/100V

transformer is terminated to a 24" direct burial rated pigtail that includes conductors for all transformer taps as well as a

direct connection for 8 Ω operation. The side firing transducer allows the installer to aim sound at targeted listening areas. 30'

spacing between loudspeakers will give good uniform coverage for most applications. For higher noise environments or where

stereo imaging is desired closer spacing and/or additional devices may be required. Please contact Atlas Sound for design

recommendations.

WiRinG insTRuCTiOns

The ROCKFA62T-BR allows for both direct coupled (8 Ω) operation and 70.7V, depending on which wires are selected for

speaker line termination.

8 Ω WiRinG

Connect the BLACK wire on the ROCKFA62T-BR to the negative or common on your amplifier, and the RED to the positive.

If your amplifier will support speaker loads down to 4 Ω, you can connect two (2) ROCKFA62T-BR's in parallel, per channel.

Consult the owners manual of your amplifier to verify this.

Use 2 conductor stranded wire of sufficient capacity to avoid voltage drops due to long lengths.

70.7V WiRinG

Connect the BLACK wire on the ROCKFA62T-BR to the negative or common on your commercial amplifier. Choose the

appropriate color for the 70.7V tap per the instructions below.

Use 2 conductor stranded wire of sufficient capacity to avoid voltage drops due to long lengths.

BLACK – COMMON

RED – 8 Ω (DO NOT USE FOR 70.7V OPERATION)

YELLOW – 32 watt TAP

GREEN – 16 watt TAP

BLUE – 8 watt TAP

ORANGE – 4 watt TAP

While the ROCKFA62T-BR is weather resistant, care should be taken during installation to avoid placing this loudspeaker near

lawn sprinklers, or locations that could flood the loudspeaker enclosure.

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •

Specifications are subject to change without notice

AtlasSound.com

Printed in U.S.A.

INSTALLATION INSTRUCTIONS

TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435

ATS003082 RevA 3/08