Atlas DAGNY Talimatlar Kılavuzu - Sayfa 10

Fan Atlas DAGNY için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Atlas DAGNY 10 sayfaları. Ceiling mounted rotational fan

REGULATION OF ROTATION OF FAN UNIT

Regulate

speed

increasing or decreasing the power at the remote control, regulating the speed of fan heads

and varying the position of the motor heads. See number 2 below

2. Vary position

of motor heads.

heads to the horizontal support rods, the greater the speed of rotation.

the fan head, the less the speed of rotation.

CARE OF AND TROUBLESHOOTING YOUR FAN

1. Check hardware bi-yearly.

may become loose over time. Check the support connections, brackets and blade attachments

twice a year. Make sure they are secure. It is not necessary to remove fan from the ceiling.

2. Clean your fan periodically.

years. Use only a lightly water-moistened,

finishes are sealed with lacquer to minimize discoloration or tarnishing. Do not let rain or running

water to come in contact with the fan.

blades or possibly cause an electrical shock.

3. There is no need to oil your fan. The motor has permanently lubricated bearings.

Fan makes a vibration

connection to the motor face plate.

5. Fan vibrates or makes grinding

Make sure that your fan head's set screw is counter-sunk into the bore hole in the flat part of the

motor shaft. Be careful that the blade brackets themselves are not bent in this process. Do not

operate your fan if it continues to vibrate. Contact your Atlas Fan Co purveyor if the re-installation

of the blades does not resolve the problem.

6. Clicking

noise from inside of center of fan.

noises are normally heard from the braking mechanism within the fan body.

bothersome, slow the unit down. To do this, see "Regulation of Rotation" section above.

7. Fan is not rotating or doing so unevenly.

verify that coupling cover has at least 1/8 - 1/4" clearance between it and fan motor assembly,

otherwise coupling cover will act as a brake, impeding rotation.

of fan. The rotation of the fan can be sped up or slowed down by

The greater the angle (either up or down) of the motor

Because of the fan's mechanical movement some connections

This will help to help maintain its new appearance over the

Rain or running water could damage the motor, wood

noise. Check to see that all screws are tight in the fan cage

noise as blades rotate. Uninstall and reinstall the blades.

lint free cloth to avoid scratching the finish. Plated

As unit rotates at higher R.P.M.s, clicking

See "Regulation of Rotation" section above and

The less the angle of

If the noise is