ABSCO SHEDS 15151SK Montaj ve Kullanım Kılavuzu - Sayfa 11
Dış Mekan Depolama ABSCO SHEDS 15151SK için çevrimiçi göz atın veya pdf Montaj ve Kullanım Kılavuzu indirin. ABSCO SHEDS 15151SK 20 sayfaları. N3/c1 frame kit
Ayrıca ABSCO SHEDS 15151SK için: Montaj Kılavuzu (20 sayfalar)
Sayfayı Yazdır
DOOR BRACING
B
D
D
C
Absco Industries
Assembly Instruction Manual
N3/C1 FRAME KIT
FOR 1.5m WIDE TO
1.5m DEEP MODELS
A
Model: CYC15
5. Place the door frame against the door,
ensure that it is centred. If the door is already
fitted to the shed you may need a second
person for this step. Alternatively you can
removed the door and refit it with pop rivets.
6. Use tek screws to fix the frame to the door
at every corner.
7. Continue fixing at 296mm spacings along
each frame member.
8. Install a third hinge at position 'A', as
shown above. This is the midway point
along the door channel and jamb. pre-drill
the holes with a 3mm drill bit and fix with 3x
FAST007 pop rivets.
8. Doors require additional padbolts.
predrill and fix with the following:
Vertical positions 'B' and 'C'
- 1x Padbolt FAST006
- 4x nut FAST005
- 4x bolt FAST004
Horizontal position 'D'
- 1x Padbolt FAST006
- 1x Door plate 12A
- 1x Hasp FAST007
- 6x Self tapping screws FAST001
9. Drill 10mm holes in the jamb above the
door and the channel below the door as
shown on the left. These are to align with
the vertical padbolt shafts.
02/03/2021
1.0
11