Advanced Power WELD 'n' WORK Kullanıcı El Kitabı - Sayfa 6

İnvertör Advanced Power WELD 'n' WORK için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Advanced Power WELD 'n' WORK 8 sayfaları.

Sayfayı Yazdır

ENGINE & ALTERNATOR SERVICE

IF ENGINE SERVICE OR REPAIR IS NEEDED, CONTACT AN AUTHORISED ENGINE SERVICE

CENTRE. TO SERVE YOU PROMPTLY AND EFFICIENTLY, THE SERVICE CENTRE WILL NEED

THE MODEL, TYPE AND ESPECIALLY THE SERIAL NUMBER OF YOUR ENGINE.

n Each Authorised Service Centre is equipped

with special service tools and trained

mechanics to ensure expert service or repair

on all engines

COMPLY WITH ENGINE OWNERS MANUAL

WHERE IT SPECIFIES MORE FREQUENT SERVICING

Carry out servicing at indicated month or

operating hours, whichever occurs first.

Engine oil

Air cleaner element

Fuel filter cleaning

Spark plug maintenance (petrol engines)

Tappet clearance adjustment (if applicable)

Combustion chamber cleaning

Fuel tank cleaning

Spark arrester (if applicable)

Fuel line

Alternator exciter brushes (if applicable)

Battery fluid - Electric start (if applicable)

NOTE:

(1) Service more frequently when used in dusty areas.

(2) Daily checks to be performed by the operator, all periodic servicing to be carried out by

an authorised service agent.

Welder Alternator Trouble Shooting Guide

Problems

Engine will not start

Generator excitation failure.

High no-load voltage.

Low no-load voltage.

Correct no-load, but

low loaded voltage.

Correct no-load, but

high loaded voltage.

Unstable voltage.

Noisy Generator.

ADVANCED POWER GENERATING SETS

Causes

1) no/low fuel

2) fuel valve is closed

3) Start/stop switch is on start position

4) Insufficient oil level

5) Faulty low oil sender

1) Low speed.

2) Faulty condenser.

3) Faulty windings.

1) Speed too high.

2) Condenser with high capacity.

1) Speed too low.

2) Faulty rotary diodes.

3) Breakdown in windings.

4) Condenser with low capacity.

1) Low loaded speed.

2) Load too large.

3) Condenser with low capacity.

1) High loaded speed.

1) Loose contacts.

2) Uneven rotation.

1) Damaged bearings.

2) Poor engine-alternator coupling.

n Major engine repairs should not be attempted

without the proper tools and a thorough

knowledge of engine repair procedures.

First

Daily

month or

3 months

first 20

or 40 hrs

hours

Inspect

Change

Inspect

Clean (1)

Clean every 100 operating hours.

Remedies

Fill fuel tank

Open fuel valve

Set to start position

Add oil to the correct level

See authorised repair agent

Check and adjust to factory

Check and replace.

Check windings resistance.

Check and adjust RPM.

Check and replace.

Check and adjust RPM.

Check and replace.

Check windings resistance.

Check and replace.

Check and adjust RPM.

Check and change.

Check and replace.

Check and adjust RPM.

Check connections.

Check for uniform RPM.

Replace.

Check and adjust.

Every

6 months

or 100 hrs

Change

Clean

YES

Replace every 3 years.

Inspect

OWNER'S GUIDE

Every

year

or 300 hrs

YES

Inspect