Alert 550R LCD Kullanıcı El Kitabı - Sayfa 11

Araba Alarmı Alert 550R LCD için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Alert 550R LCD 13 sayfaları.

Sayfayı Yazdır

F -

(-second)

Program Count Down (Parking)

Timer (0-Minute / 0M / 0

M /Hour /.5H / .0H)

1. Screen Lamp ON: Press and hold the F button one second, with one melody sound and the

LCD screen lamp will turns on for 5 seconds

2. Clear the Flash Icon and melody Sound: Press the F button times within seconds will

clear the flash icon and melody sound on the LCD screen transceiver

3. Stop The Trigger melody Sound: While triggering the alarm the LCD screen will alert user

through melody sound and flashing trigger icon, press any button on the LCD remote transmit-

ter to stop melody sound only.

4. Vibration / melody mode: It is useful when you are in a noisy place and

difficult to hear beep sound from the remote control as the remote control

in this mode, vibrates itself if your security system is triggered.

Press the F button first, within seconds press and hold the button

for seconds to select the mode of vibration or melody, the

will displayed on the LCD screen to show the LCD remote transceiver is on

vibration mode.

5. Low Battery Indication: When the power of the battery weakens, it has two short " beep"

sound and flash

icon while pressing the button of the LCD screen transceiver.

6. Set Up Fixed Count down (parking) Timer:

. Press the F button first, within seconds press and hold the

LCD screen will shows icon and timer (ie. 0:0) ,

. Press the

button again showing next order time on the screen ( ie.0:0), press it again

(ie.0:0).....and so on.

. Leave the buttons starting count down then

Note:

. The count down period is fixed as 0 minutes, 0 minutes, 0 minutes, hour, .5 hours and

hours maximum.

. When count down timer showing 0:00 means to turn off the timer.

. Press F button for real time indication when the timer is counting down.

Press within seconds to cycle

*leave the buttons starting

count down then

flashes

icon

button for seconds, the

icon flashes

7. Out Of range Indication: If this feature is selected, the security system will automatically

check the range every 0 minutes after armed.

. If user is within the range, the icon will display on the LCD screen.

. If user is out of range, it has five short " beep" sounds and the icon will disappear on the

LCD screen.

D. TIMER SETTING:

Transceiver Button

Description

Press & Hold the F

Timer Setting (Hour)

button for seconds

*Flashes digit for adjusting

Press the F button once Time setting (Minute)

*Flashes digit for adjusting

Press the F button once. Alert Alarm Time Setting (Hour)

*Flash digit for adjusting

Press the F button once Alert Alarm Time Setting (Minute)

*Flashes digit for adjusting

Press the F button once Alert Alarm Setting ON / OFF

Press the F button once Count Down Timer Setting (Hour)

*Flashes digit for adjusting

(Max.9 hours 59 minutes)

Press the F button once Count down Timer Setting (Minute)

*Flashes digit for adjusting

Daily Timer Start Timer Setting

Press & hold the but-

Flashes ¿ /

ton for seconds

adjusting

EXIT: Press and hold the F button for seconds or leave it for 0 seconds, the system will exit the

programming mode.

Press Transceiver Button

✱

for – and

✱

for – and

✱

for – and

for +

✱

for – and

✱

for OFF and

for ON

✱

for – and

✱

for – and

✱

for – and

Icon and " Hours" for

for +