Alert 450R Kullanıcı El Kitabı - Sayfa 6

Uzaktan Kumanda Alert 450R için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Alert 450R 14 sayfaları. Remote starter system

OPERATION

I. VALET MODE: (System in Disarmed or Valet Mode)

The valet/program switch allows you to temporarily bypass all alarm

functions, eliminating the need to hand your transmitter to parking attendants

or garage mechanics. When the system is in Valet Mode, all alarm

functions and remote starter functions are bypassed, however the remote

panic feature and remote door locks will remain operational from the remote

control. To use the Valet Mode, the system must first be disarmed either

by using you remote transmitter, or by operating the manual override

sequence.

To Enter Valet Mode:

1. With the system in disarmed mode, turn the ignition key to the ON

position.

2. Press and hold valet/program switch for 2 seconds or until the LED

turns on. The LED will remain on for as long as the system is in Valet

Mode.

To Exit Valet Mode:

1. To return to normal operation, turn ignition key to the ON position.

2. Press and hold the valet/program switch for 2 seconds, The LED will

turn off,indicating the system has exited the Valet Mode.

REMOTE VALET: (System in Disarm or Valet Mode)

Press and release the

3 seconds to enter / exit valet mode.

The parking lights will flash (1) time to confirm entering of Valet Mode

and (2) parking light flashes to confirm the exiting of Valet Mode.

J. PANIC FUNCTION:

The transmitter can be used as a remote panic button, to manually trigger

the panic alarm in case of emergency.

1. Press and hold the

sound in Panic Mode.

2. During Panic Mode, the normal functions of the transmitter buttons

will be suspended. The

the doors (if the option is installed), however once the

pressed, the vehicles starter disable device, (if installed) will be enable

allowing the vehicle to start.

button on the transmitter (3) three times within

button for 3 second. The alarm will immediately

and

buttons can be used to lock and unlock

button is