Bose AM267565 Kullanıcı Kılavuzu - Sayfa 32

Konuşmacılar Bose AM267565 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Bose AM267565 34 sayfaları. Bose corporation user guide speaker am267565

Sayfayı Yazdır

Reference

Troubleshooting

Neither speaker

•

plays

•

The bass or treble

•

is weak

•

Only one speaker

• Check the balance control on your receiver/ampliﬁer and make sure it is centered.

plays

• Check the wires connected to the speaker that does not play. Make sure the wires are in good

Only one speaker

•

still plays

•

Static or noise from

•

one speaker

Customer service

For additional help in solving problems, contact your Bose dealer. Or, to contact Bose Customer Service, refer to the

address list included in the carton.

Warranty period

Bose Virtually Invisible

191 speakers are covered by a limited 5-year transferable warranty. Details of coverage are on the

warranty card that came with your speakers. Please ﬁll out the information section, detach, and mail it to Bose.

Check the settings on your receiver/ampliﬁer. Refer to the owner's guide that came with it for

instruction on settings.

If your Virtually Invisible

191 speakers are the second pair of speakers connected to your

receiver/ampliﬁer, make sure the connections have been made to the "B" terminals and that

the "B" speakers are selected to play.

Check the tonal balance setting on your receiver/ampliﬁer.

Check for consistent polarity of the connections (+ to + and – to –) to the receiver/ampliﬁer and

to the speaker.

Review "Make the speaker connections" on page 26.

condition and are ﬁrmly connected. Review "Make the speaker connections" on page 26.

Trace the cord from the speaker in question to the receiver/ampliﬁer. Disconnect the cord from

the receiver/ampliﬁer channel and reconnect it to a different receiver/ampliﬁer channel.

– If the performance is now ﬁne, the problem lies in the original receiver/ampliﬁer channel, the

component source of the music, or the connections between the receiver/ampliﬁer and the

source. Check all of those to make sure they are performing properly. Reconnect the speaker

to the correct channel of a functioning receiver/ampliﬁer.

– If the problem persists, its source is either the speaker wire or the speaker in question. Follow

the next instruction.

Disconnect the cord from the speaker in question and reconnect it to the second speaker.

– If the performance is now ﬁne, the problem lies in the original speaker. Contact your autho-

rized Bose

dealer, who will arrange for service. Or, to contact Bose directly, refer to the

address list included in the carton.

– If the problem persists, its source is the speaker wires. Follow the next instruction.

Before you take steps to replace and re-run the speaker wire, recheck all of the connections.

Then repeat the procedure for pinning down the problem source, above.

Check the connections at the speaker and at the receiver/ampliﬁer. Make sure the wires are in

good condition, are ﬁrmly connected, and no wires are touching across terminals. Also check

the connections from the receiver/ampliﬁer to the component source of the music.

– If the problem persists, follow the troubleshooting instructions for "Only one speaker still

plays," above.

AM267565_01_V.pdf May 13, 2003