Bose DesignMax DM6SE Kurulum Kılavuzu - Sayfa 3
Konuşmacılar Bose DesignMax DM6SE için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Bose DesignMax DM6SE 9 sayfaları. Surface-mount loudspeaker
Sayfayı Yazdır
PRO.BOSE.COM
Package Contents
× 2
Product Dimensions
340 mm
13.39 in
Technical Specifications
For additional specifications, see the DesignMax DM6SE technical
data sheet at PRO.BOSE.COM.
Physical
Product Dimensions
Net Weight, Loudspeaker with
grille and bracket (single)
Shipping Weight (pair)
Installation Guide • DesignMax DM6SE
× 2
245 mm
9.75 in
229 mm
9.00 in
Height: 340 mm (13.39 in)
Width: 222 mm (8.74 in)
Depth: 229 mm (9.00 in)
6.40 kg (14.1 lb)
14.74 kg (32.5 lb)
× 2
222 mm
8.74 in
Ø 5.5 mm
0.22 in
Important Installation Information
It is the installer's responsibility to ensure installation of the loudspeakers
and mounting system is performed in accordance with all applicable
codes, including local building codes and regulations. Consult the local
authority having jurisdiction before installing this product.
It is the responsibility of the installer to ensure the safety of the
loudspeaker installation. Failure to properly install the loudspeaker could
result in damage, injury, or death.
This product is not intended for installation or use in indoor water facility
areas (including, without limitation, indoor pools, indoor water parks, hot
tub rooms, saunas, steam rooms and indoor skating rinks).
The hardware for securing the loudspeaker to the mounting surface is
not supplied. Consult a building professional for the proper mounting
hardware before installing the loudspeaker.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produces heat.
Do not mount on surfaces that are not sturdy, or that have hazards
concealed behind them, such as electrical wiring or plumbing. If you are
not sure about installing the bracket, contact a qualified professional
installer. Ensure the bracket is installed according to local building codes.
Do not expose loudspeaker or mounting components to any chemical
substances that are not specified by Bose, including but not limited to
lubricants, cleaning agents, contact sprays, or other hydrocarbon-based
solvents. Exposure to such substances can lead to degradation of the
plastic material, resulting in cracking and creating a falling hazard.
Overview
× 2
223 mm
8.78 in
210 mm
8.27 in
267 mm
10.50 in
English • 3