Bose FreeSpace 8 Montajcı El Kitabı - Sayfa 15

Konuşmacılar Bose FreeSpace 8 için çevrimiçi göz atın veya pdf Montajcı El Kitabı indirin. Bose FreeSpace 8 23 sayfaları.
Ayrıca Bose FreeSpace 8 için: Montajcı El Kitabı (17 sayfalar)

Sayfayı Yazdır

Rotation feature

The rotation feature provides access to the loudspeaker terminals during or after

installation. This feature can be used for extra support while completing electrical

connections or changing tap settings. The rotation feature is not an option if the

ceiling is very thick or the tiles are very soft. See the guidelines in Section 3.1,

"Ceiling type." If the rotation feature is

used, be careful not to damage the

edge of the mounting hole or the

loudspeaker rim.

1. Pull the loudspeaker down until the

top clears the mounting hole (Figure

21).

Turn the loudspeaker until the

terminal cover is facing down and

can be opened.

Note: If the top of the loudspeaker

cannot easily clear the mounting hole,

the ceiling is too thick. Remove the

loudspeaker as described in Section 4.5

"Removing installed loudspeakers."

Complete electrical connections and

reinstall.

2. Gently rest the loudspeaker against

the mounting hole (Figure 22).

3. Connect wires or change tap setting

as described earlier.

4. Pull the loudspeaker down and turn

until the terminal cover faces up.

5. Gently release the loudspeaker

back into the mounting hole.

AM177915_03_V.pdf • May 6, 2002

4.0 Installation

Figure 21

Figure 22