Bose Panaray LT Series III Referans Kılavuzu - Sayfa 33

Konuşmacılar Bose Panaray LT Series III için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Bose Panaray LT Series III 40 sayfaları. Panaray lt series iii

Sayfayı Yazdır

To Replace the V-2 Mid-frequency Driver in the Panaray

LT 9402

-III or LT 9702

1. Turn off the ampliﬁer power.

2. Disconnect the loudspeaker input connection(s).

3. The LT 4402-III, LT 9402-III and LT 9702-III use two V2 drivers. Remove the four screws securing each V2 driver to the

cabinet.

CAUTION: Be careful not to let the driver fall out of the cabinet.

4. Disconnect the following:

• For the top V2, disconnect the RED (+) and BLUE (-) wires connected to the driver.

• For the bottom V2, disconnect the BLACK (+) and BLUE (-) wires.

5. Replace the damaged V2 driver.

6. Make the following connections:

• For the top V2, connect the RED (+) and BLUE (-) wires connected to the driver.

• For the bottom V2, connect the BLUE (+) and BLACK (-) wires.

7. Secure each V2 driver to the cabinet with the four screws (on each V2).

8. Reconnect the input connections.

9. Turn on ampliﬁer power.

-III Loudspeakers

Service Information

LT 4402

-III,