Atlas Copco 4390151987 Ürün Talimatları - Sayfa 3

Araçlar Atlas Copco 4390151987 için çevrimiçi göz atın veya pdf Ürün Talimatları indirin. Atlas Copco 4390151987 12 sayfaları. Torque arm

Sayfayı Yazdır

SMC-50-2100-POSI-L

Product information

General information

WARNING Risk of Injury

Failure to follow all the instructions may result in electric shock, fire and/or

serious personal injury.

Ensure that you read and understand all instructions:

• Safety Information delivered together with the different parts of the sys-

tem.

• Product Instructions for installation, operation and maintenance of the

different parts of the system.

• All locally legislated safety regulations with regard to the system and

parts thereof.

Save all safety information and instructions for future reference.

Safety signal words

The safety signal words Danger, Warning, Caution, and Notice have the follow-

ing meanings:

DANGER

WARNING

CAUTION

NOTICE

Warranty

• Product warranty will expire 12 months after the product is first taken into

use but shall in any case expire at the latest 13 months after delivery.

• Normal wear and tear on parts is not included within the warranty.

• Normal wear and tear is that which requires a part change during the

standard tools maintenance for that period taking into consideration the

number of tightening and average applied torque.

• The product warranty relies on the correct use, maintenance, and repair of

the tool and its component parts.

• Damage to parts that occurs as a result of inadequate maintenance or per-

formed by parties other than Atlas Copco or their Certified Service Partners

during the warranty period is not covered by the warranty.

• To avoid damage or destruction of tool parts, service the tool according to

the recommended maintenance schedules and follow the correct instruc-

tions.

• Warranty repairs are only performed in Atlas Copco workshops or by Certi-

fied Service Partners.

Atlas Copco offers extended warranty and state of the art preventive mainte-

nance through its ToolCover contracts. For further information contact your lo-

cal Service representative.

DANGER indicates a hazardous situation which, if not avoided, will result in death or

serious injury.

WARNING indicates a hazardous situation which, if not avoided, could result in death

or serious injury.

CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if

not avoided, could result in minor or moderate injury.

NOTICE is used to address practices not related to personal injury.

Product information