Atlas Copco PB 14 D Hızlı Başlangıç Kılavuzu - Sayfa 4

Araçlar Atlas Copco PB 14 D için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Atlas Copco PB 14 D 11 sayfaları.

Removing the

Unscrew and remove both brush covers

carbon brushes

(1) from the motor housing.

and the electric

Push the spring (2) aside with a pair of

supplies

pliers and pull the carbon brushes (3) from

their holders.

Release the locating screws (4) and

remove the carbon brushes with the lead.

Release the two securing screws (6) and

remove the terminal bracket (7).

Disconnect the leads from the terminal

block (5) and remove it.

Dismantling the

Release the screws of the handle locking

rear handle

plates (4), lift the plate with a screwdriver,

assembly

and remove it.

Lever off the handle support (3) with a

screwdriver and remove the rear handle

from the housing.

Remove the handle support (3) and the

handle support rubbers (2) from the rear

handle front (7).

Unscrew and remove the rear handle

grip (5).

Depress the locking button of the switch

(6) and remove the switch from the rear

handle front (7).

Separating the

Remove the six Allen screws (4) and

motor housing

remove them together with the inserts (3).

from the bearing

Separate the motor housing (2) from the

housing

bearing housing (1).

Repair instruction No. 171.5/94

PB 14 D, PB 14 C

PAGE