Atlas Copco PHE 26 Onarım Talimatları - Sayfa 8

Araçlar Atlas Copco PHE 26 için çevrimiçi göz atın veya pdf Onarım Talimatları indirin. Atlas Copco PHE 26 8 sayfaları.

Sayfayı Yazdır

Mounting the

Completely assemble the wheel shaft (6)

wheel shaft

and press the reduction gear flush onto

the wheel shaft.

Insert the complete wheel shaft into the

motor housing (8) and fasten it with

screws. Additionally secure the screws

with screw locking device.

Insert the percussion body (4) and the pis-

ton con-rod (5) together with the four-lip-

seal-ring into the cylinder (3).

Insert the cylinder (3) into the motor hous-

ing (8) and insert the con-rod into the

wheel shaft tappet.

Insert the field and the air deflector

plate (9) into the motor housing (8).

Fasten the pre-assembled bearing end

plate with screws to the gear box. Addi-

tionally secure the screws with Omnifit.

Fasten the completed gear box to the mo-

tor housing (8) with screws. Additionally

secure the screws with Omnifit.

Fit the housing cover (1) together with the

gasket and fasten it with screws.

Mounting the

Insert the carbon brushes (9) into the

carbon brushes

brush holders (8) and mount the plug con-

tacts.

Insert the brush holders (8) with the car-

bon brushes (9) above the armature col-

lector into the reliefs of the lower handle

shell (1). Take care that the strands of the

armature collector keep free.

Install the switch (2) and the capacitor (7) to-

gether with all the strands into the provided

reliefs of the handle shell (1) and connect

them according to the wiring diagram.

Mount the power supply lead and the ca-

ble entry sleeve (6) with the cable clip (3).

Connect the power supply lead according

to the wiring diagram.

Fasten the upper handle shell (4) with the

five screws (5).

Test Run

Check the direction of rotation!

Let the machine run-in.

Electrical Test

Perform an electrical test on the machine (see chapter Electrical and Mechanical Test Instructions).

Use a new bearing cover (7).

Repair Instructions No.163.01/96

PHE 20 / PHE 26 / PHE 200

PAGE