Bose Wave radio Series III Kullanıcı El Kitabı - Sayfa 11
Konuşmacılar Bose Wave radio Series III için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Bose Wave radio Series III 26 sayfaları. Enabling standby low power mode
Ayrıca Bose Wave radio Series III için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
Component
Cable
Portable CD or tape
One miniplug-to-
player
stereo audio cable
CD player, tape deck,
One stereo audio
or VCR
cable
Use a standard RCA
Television
cable for a TV with
stereo output jacks.
Use a standard Y
adapter for a TV with a
single (mono) audio
output jack.
You may need a special
adapter for a TV with a
headphone outlet.
®
®
Bose
Lifestyle
Stereo cable with
music system
male-to-male RCA
plugs.
®
Powered Bose
Use the audio input
speakers
cable that came with
your speakers.
Connection at
Connection at
component
Wave radio
Headphone jack
AUX IN jacks
For best sound, set
the player volume
control to approxi-
mately
3
/
of maximum
4
volume.
Audio output jacks
AUX IN jacks
If there are two sets of
outputs (fixed and
variable), use fixed so
that the volume can
be controlled from the
radio.
Audio output jacks
AUX IN jacks
If there are two sets of
outputs (fixed and
variable), use fixed so
that the volume can
be controlled from the
radio.
AUX IN jacks
TAPE (REC) jacks
Speaker system input
VARIABLE OUT jacks
(as described in the
speaker owner's
manual)
Note
R
L
AUX IN
Recording from your Wave
recommended because connections to
R
L
the VARIABLE OUT jacks shut off the
radio speakers, preventing you from
AUX IN
monitoring the recording volume.
To make sure the sound seems to
come from the screen, place the
R
L
Wave radio close to the TV. If there is
AUX IN
any interference with the TV picture,
move the radio farther away.
CAUTION: To prevent interference
with the TV picture, do not place the
Wave radio directly on top of the TV.
R
L
AUX IN
If your Bose audio input cable has
three connectors at the non-speakers
end, use only the two connectors that
look alike to connect to the radio
VARIABLE OUT
outputs. DO NOT USE THE THIRD
CONNECTOR.
Connecting speakers to the VARI-
ABLE OUT jacks shuts off the radio
speakers.
Setting Up
®
radio is not
11