Bose Acoustimass 16 Kullanıcı Kılavuzu - Sayfa 8

Hoparlör Sistemi Bose Acoustimass 16 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Bose Acoustimass 16 18 sayfaları. Home entertainment speaker systems
Ayrıca Bose Acoustimass 16 için: Kullanıcı El Kitabı (18 sayfalar), Hızlı Kurulum Kılavuzu (1 sayfalar), Manuel (24 sayfalar)

Sayfayı Yazdır
Bose Acoustimass 16 Kullanıcı Kılavuzu
Connecting
the speakers
_,
CAUTION: Never connect the cube speaker arrays directly to a receiver output. Always con-
nect them to the powered Acoustimass _'_ m odule, then connect the module to the receiver.
,_
CAUTION: Never use broken or frayed wiring, which can result in electrical shock or damage
to your system. The suppfied cables are not intended for in-wall installation. Check local
building codes or enlist a qualified installer.
Connecting
front
cube
speaker
arrays
to the Acoustimass
module
Three individual 20-foot (6.1m) speaker cables connect the center, right, and left front cube
speaker arrays to the Acoustimass
module (Figure 5). Be sure to match the correct cable with
the corresponding
speaker location. Front speaker cables have blue RCA connectors at one
end with L (left), R (right), or C (center) molded into the connectors. The other ends of the
cables have two wires. The red collars on the + wire are labeled LEFT, RIGHT, or CENTER.
Note: The center rear cube speaker array is included with the Acoustimass
16 system or may
be added to an Acoustimass
15 Series II system. For upgrading information, see "Upgrading
your Acoustimass
15 Series II speaker system" on page 12.
Figure
5
Cube speaker array
connections to the
Acoustimass module
/
/
S_
f
8
AM264924_00 _ V.pdf • August 13, 2002