Bose Acoustimass 16 Series II Kullanıcı El Kitabı - Sayfa 11
Hoparlör Sistemi Bose Acoustimass 16 Series II için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Bose Acoustimass 16 Series II 44 sayfaları. Home entertainment speaker system
Ayrıca Bose Acoustimass 16 Series II için: Kullanıcı El Kitabı (33 sayfalar), Hızlı Kurulum Kılavuzu (1 sayfalar), Kullanıcı El Kitabı (24 sayfalar)
Sayfayı Yazdır
English
Español
Getting the most from your home theater speakers
Figure 9
Audio adjustment knobs
Français
With system connections completed and the module plugged in, your Acoustimass
is now ready for use.
You may want to familiarize yourself with the controls and built-in protections that adjust !
the audio of this system (Figure 9). They offer options to suit your particular style of use and !
preferences.
CAUTION: This system provides an automatic protection circuit to help guard against damage
from electrical stresses and overload of the system. At high volume levels, the circuit activates to
reduce output, which slightly decreases the volume. If you notice this decrease, be aware that
your system is functioning as designed. This volume reduction also indicates that power input
to the system may exceed safe levels. Sustained listening at these levels is not recommended.
Adjusting the bass/room compensation
After placing the Acoustimass module where you want it, you can fine-tune it for that !
location. Make this adjustment only as necessary.
For example:
• If the system performance is "thin" or lacks bass, turn the BASS control (shown above)
clockwise to increase the low-frequency output of the module.
• If the audio is "boomy" or overemphasizes bass, turn the knob counter-clockwise !
to reduce the low-frequency output of the module.
The setting made at the factory is meant for use in the most common room arrangements.
Adjusting the LFE level
The LFE (low-frequency effects) level control (shown above) is for use only with receivers that
provide an LFE/SUBWOOFER channel.
By turning the knob, you can adjust the relative level of the low-frequency effects from movie
soundtracks. Use it to match the volume level of the LFE channel with volume levels of your
other speaker channels.
You can check all levels by using the "test tones" feature on your digital surround sound
receiver. For details on using this feature, refer to the owner's guide provided with your !
surround receiver.
U
SING YOUR SYSTEM
®
system
11