Atlas Copco QMC41-250-I06 Ürün Talimatları - Sayfa 7

Elektrikli Tornavida Atlas Copco QMC41-250-I06 için çevrimiçi göz atın veya pdf Ürün Talimatları indirin. Atlas Copco QMC41-250-I06 16 sayfaları. Fixtured current controlled

Sayfayı Yazdır

QMC41-250-I06

Installation

Installation Instructions

Installing the tool

For details, please refer to the dimensional drawings.

Mechanical installation

Attach the tool to the fixture in one of the following ways:

A: Using the threads at the front part, accessible under the thread protection ring.

B: Using the holes of the tool base.

Four holes are intended for screws and two holes are intended for guide pins.

Electrical installation

Connect the tool to the drive using the supplied cable.

NOTICE Make sure the cable is not bent more than a radious of 55 mm (2.2 in).