Bose L1 Pro8 Kullanıcı El Kitabı - Sayfa 8

Hoparlör Sistemi Bose L1 Pro8 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Bose L1 Pro8 18 sayfaları. Portable line array system
Ayrıca Bose L1 Pro8 için: Ürün Yazılımı Güncellemesi (4 sayfalar), Ürün Yazılımı Güncellemesi (44 sayfalar)

Sayfayı Yazdır

System Setup

Connecting Power

Plug the power cord into the Power Input on

the L1 Pro.

2. Plug the other end of the power cord into a live

electrical outlet.

Note: Do not power on the system until after you've

connected your sources. See Connecting Sources

below.

3. Press the Standby Button. The LED will

illuminate white while the system is on.

Note: Press and hold the Standby Button for 10

seconds to reset the system to factory settings.

AutoOff/Low-power Standby

After four hours of no use, the L1 Pro will enter

AutoOff/Low-power Standby mode to save power.

To wake the system from AutoOff/Low-power

Standby mode, press the Standby Button.

Connecting Sources

Channel 1 & 2 Controls

Channel 1 and 2 are for use with microphones, guitars, keyboards,

or other instruments. Channel 1 and 2 will automatically detect a

source input level to adjust volume taper and gain stage.

Connect your sound source to the Channel Input with the

appropriate cable.

2. Apply a ToneMatch preset—to optimize the sound of your

microphone or instrument—by pressing the Channel ToneMatch

Button until the LED for your chosen preset is illuminated.

Use MIC for microphones and use INST for acoustic guitars

and other instruments. Use OFF if you do not want to apply a

preset.

Note: Use the L1 Mix app to choose custom presets from the

ToneMatch library. The corresponding LED will illuminate green

when a custom preset is selected.

3. Press the Channel Parameter Control to choose a parameter

to modify. The parameter name will illuminate white while it is

selected.

4. Rotate the Channel Parameter Control to adjust the level of the

selected parameter. The parameter LED will indicate the level of

the selected parameter.

Note: While Reverb is selected, press and hold the control for

two seconds to mute the reverb. While reverb is muted, Reverb

will flash white. To unmute reverb, press and hold for two

seconds while Reverb is selected. Reverb mute will reset when

the system is powered off.

8 • English

L1 Pro8/Pro16 Portable Line Array System • Owner's Guide

PRO.BOSE.COM

INST