Bose QC25 Kullanıcı Kılavuzu - Sayfa 12

Kulaklık Bose QC25 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Bose QC25 15 sayfaları.

8. Factory Reset

In the status of power off or charging, long press MFB button and

about 3 seconds and release it until the red and blue LED flashes

simultaneously.

Remarks:

After factory reset, the paired list of the BTunes will be deleted. After power

on again, the BTunes will enter pairing mode automatically, and you need to

re-pair and connect with Bluetooth devices.

Read the following recommendations carefully before using the BTunes.

Following these you will be able to enjoy this product for many years.

Keep it dry and don't put it in the damp place to avoid the product's internal

◆

circuit being affected.

◆

Keep the product away from direct sunlight or hot places. High

temperatures will shorten the life of electronic devices, destroy the battery

or distort certain plastic part.

Don't expose the product to cold areas. It may damage the internal circuit

◆

board.

Don't try to disassemble the product as it may get damaged if you are not

◆

professional.

Don't let it fall down onto the floor or other hard surfaces. The internal

◆

circuit might get damaged.

Don't use intensive chemical products or detergent to clean the product.

◆

Don't scratch the surface with sharp things. It may get damaged by sweat.

◆

Please don't attempt to take out the battery from the BTunes, as this might

◆

damage it.

Improper uses may invalidate manufacturer's warranty.

◆

button