3M G5 Teknik Bülten

Kulaklıklar 3M G5 için çevrimiçi göz atın veya pdf Teknik Bülten indirin. 3M G5 2 sayfaları. Drive-thru systems
Ayrıca 3M G5 için: Hızlı Referans Kılavuzu (2 sayfalar), Teknik Bülten (6 sayfalar), Manuel (10 sayfalar), Hızlı Başlangıç Kılavuzu (3 sayfalar), Teknik Bülten (12 sayfalar), Manuel (8 sayfalar)

3M™ Wireless Communication System Model XT-1 and G5

Technical Bulletin- #150

XT-1 and G5 Wireless Headsets, Battery, Battery Charger and Charging Station

– Semi-Annual Maintenance

The ear pads, ear cups, headband pad and windscreen foam pads on a XT-1 Wireless

headset should be inspected and if missing, replaced to provide comfort for the user and to

ensure proper operation. The batteries contacts should be cleaned if you see any dirt or

grease layered on the contacts. The battery charger should be checked to ensure proper

operation..

It is recommended that this be done on a monthly basis.

This document describes the maintenance procedure.

Frequency:

Monthly

Time Required: 10 minutes to prepare

Time of day

Evening after closing.

•

Gather equipment to be inspected

Gather all headsets, batteries and battery charger.

Tip:

For 24-hour restaurants, clean equipment not in use first. Then swap out cleaned

equipment with equipment worn by crew members.

•

Replace any parts missing on the headset

Verify that all headsets have windscreens, ear foam pads and cushions. If missing,

replace as needed, from the Manager's Service Kit.

Order Manager's Service Kit (SKU# 78-6911-4740-5) by calling 1-800-328-0033

10 minutes to complete

For 24-hour restaurants: during slow period