Bose CineMAte 520 Kullanıcı El Kitabı - Sayfa 29
Ev Sinema Sistemi Bose CineMAte 520 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Bose CineMAte 520 34 sayfaları. Soundtouch series ii wireless adapter
Ayrıca Bose CineMAte 520 için: Kullanıcı Kılavuzu (49 sayfalar), Kullanıcı Kılavuzu (6 sayfalar), Kullanıcı El Kitabı (22 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
Troubleshooting
Problem
What to do
No power
• Secure the Acoustimass
• Reconnect the Acoustimass module's and console's power cords firmly
into an AC (mains) outlet.
• Use the remote control to power on the system.
• Factory reset the system (see page 31).
No sound
• Unmute the system.
• Increase the volume.
• Plug the Acoustimass module and console into a live AC (mains) outlet.
• Insert the HDMI cable into a connector on your TV labeled ARC or Audio
Return Channel. If your TV does not have an HDMI ARC connector, use a
secondary audio cable in addition to the HDMI cable (see page 15).
• If using a secondary audio cable, insert the cable into a connector on your
TV labeled Output or OUT, not Input or IN.
• Secure all cable connections on the speakers, TV and connected sources.
• If your source is connected to your TV, select the correct TV input
(see page 24).
• Disconnect headphones when not in use.
• If connecting your source through the
using the System menu (see page 26).
• If you are connecting headphones to the
Headphones using the System menu (see page 26).
• If you see the error message Cannot find Acoustimass, pair the
Acoustimass module with the console (see page 30).
• Factory reset the system (see page 31).
• Insert the HDMI cable into a connector on your TV labeled ARC or
Sound is
coming from
Audio Return Channel (if available).
your TV
• Turn off your TV speakers (refer to your TV owner's guide).
speakers
• Decrease your TV volume to its lowest setting.
Remote
• Match the + and – symbols on the batteries with the + and – markings
control is
inside the compartment (see page 17).
inconsistent
• Replace the battery (see page 17).
or does not
• Press the volume button on the remote control and see if the correct
work
source button flashes.
• If using CEC:
- Point the remote control at the console.
- Program the remote to control your source (see page 23).
• If you have programmed the remote to control your source:
- Point the remote control at the appropriate source.
- Ensure you have entered the correct code for your source's brand.
- Program the remote with another code (see page 23).
Care and Maintenance
module's and console's power cords.
®
connector, enable Audio in
connector, enable
English - 29