Reference
Figure 18
Miniature house code
switches on the Main room
(A) remote
Setting up a second room with sound
38
Using the media center:
1. Lift the media center door and press the All Off button.
2. Press and hold the Store button. Your current house code will appear in the media center
display window in the form of four rectangles, which represent the positions of switches
1 through 4:
HOUSE CODE:
Switches 1 - 4 down = 0 0 0 0 (current house code)
3. While holding the Store button, press any button on the remote control.
The media center displays the new house code, which confirms its recognition of the
new code:
NEW HOUSE CODE:
(Switch 1 up, 2 down, 3 up, and 4 down = 1 0 1 0 (new house code)
4. Release the Store button. The system remains off.
5. If you have additional remote controls, change the switches to match those of the first
remote control by following steps 1-3 above. You do not need to repeat steps 4-8.
Note: To verify your system's house code, press Store while the system is off. The display con-
firms the settings of switches 1-4.
Switches (1-4)
As set at the factory:
all switches down.
1 2 3 4 5 6 7 8 9
®
Your LIFESTYLE
DVD home entertainment system can direct sound to more than one room
at the same time. What's more, it can even direct sound from two different sound sources
(such as CD, AM/FM tuner, TAPE, or AUX) to these rooms through two independent
"streams."
In other rooms with speakers (beyond the main room where the media center is located), you
can choose either of these streams from different sources, for true independence. If the sys-
tem is on in the main room, listeners in other rooms can enjoy the same program playing
there or an entirely different program.
Capable of supplying up to 14 addiitonal rooms with Bose sound, one LIFESTYLE
can fill your entire living space with music.
1 2 3 4 5 6 7 8 9
Other switches
Switch 5 determines what "stream"
or program you hear.
For more information on streams,
refer to "Setting up a second room
with sound" below.
Switches 6-9 represent the room
where the remote will be used.
In the main room, the remote is set
as Room A with all switches down.
For a Bose
®
link remote
in another room
Switches 1-4 need to match those
switch settings in your main remote.
Set switches 5-9 for the room where
®
you will use the Bose
link remote.
®
system
Sayfayı Yazdır