Bose LIFESTYLE V35 Kullanıcı El Kitabı - Sayfa 9

Ev Sinema Sistemi Bose LIFESTYLE V35 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Bose LIFESTYLE V35 25 sayfaları. Home entertainment systems
Ayrıca Bose LIFESTYLE V35 için: Kurulum Kılavuzu (18 sayfalar), Kullanıcı El Kitabı (13 sayfalar), Kullanım Kılavuzu (34 sayfalar), Kullanım Kılavuzu (32 sayfalar), Kullanım Kılavuzu (34 sayfalar), Kurulum Kılavuzu (35 sayfalar), Manuel (32 sayfalar), Kullanım Kılavuzu (4 sayfalar), Manuel (34 sayfalar), (İngilizce) Kullanıcı Kılavuzu (32 sayfalar)

Sayfayı Yazdır

ETUP

Figure 6

Connections using the

adapter cable

Check the indicators and settings

Source Product

Audio Output

Transmitter

Adapter cable

3. Complete the connections using the power pack:

–

Insert the small plug on the power pack cable into the AC Power jack.

–

Plug the pack into an AC wall outlet.

The Status LED lights to verify this power connection.

Note: For information on the meaning of the different Status LED lights, refer to "Check the

indicators and settings" below.

To control volume when a non-Bose product is the sound source:

• There is no need for an expansion room remote control.

• Use the remote that came with the tuner/receiver in the room where it is connected to the

transmitter.

• Use the volume control on the system, radio, or powered speakers connected to the

receiver in the other room.

To control non-Bose or older Bose products in the expansion room:

• Use a Bose

link remote control or the PERSONAL

LIFESTYLE

system in the main room.

• Use the product remote or console control for local volume adjustments.

Before you use the audio link, you may want to check some of the indicators and settings

that make your expansion products work together smoothly.

The Status LED

On the connection panel of both the transmitter and the receiver, the Status LED indicates

how the two units are communicating, as shown in the table below.

Status LED

Blinking Green

Searching for

On the

receiver

transmitter

Searching for

On the

transmitter

receiver

On the receiver, a blinking or solid orange light indicates a communications problem. Reposi-

tioning the transmitter or receiver, or both, may resolve the problem and cause both LEDs to

change to solid green. For further information, refer to "Troubleshooting" on page 10.

Français

Expansion Room Product

Audio Input

Receiver

Bose

link

INPUT

music center II to select audio from the

Solid Green

Blinking Orange

Receiver

Not

located

applicable

Solid signal

Weak signal

received

Español

English

Bose

OUTPUT

Adapter cable

Solid Orange

Powered on,

no communication

Weak or no signal

received

link