Bose ControlSpace AMS-8 Kullanıcı Kılavuzu - Sayfa 11
Stereo sistemi Bose ControlSpace AMS-8 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Bose ControlSpace AMS-8 16 sayfaları. Audio management system
Ayrıca Bose ControlSpace AMS-8 için: Yazılım Kılavuzu (32 sayfalar)
Sayfayı Yazdır
3.3 ControlSpace
AMS-8 Local Input Module (CS-LIM)
™
3.4 ControlSpace
AMS-8 Paging Panel (CS-PP)
™
1
1
2
3
The ControlSpace AMS-8 Local Input Module allows to use the central sound system for sound sources
that can be plugged in locally, e.g. a CD player, a microphone or a laptop for a presentation or movie.
The level of the microphone gain can be adjusted.
1
2
3
1. AUDIO INPUT (RCA) – Input Left and Right for a local audio source input
2. MICROPHONE INPUT (XLR) – Input socket for a local microphone
3. MICROPHONE GAIN ADJUSTER – Adjuster to adjust the gain
Turn the adjuster anti clockwise to decrease the gain with a minimum of 32dB.
Turn the adjuster clockwise to increase the gain to a max of 66dB. The factory gain setting is 38dB.
If one uses the audio and the microphone input, both signals will be audible.
The CS-LIM can be configured so the inputs are available in all rooms or only in the specific room
where it is installed.
1. ROOM SELECTION BUTTONS – By pressing a room button one selects a specific room or zone
(group of zones) for paging. The indicator (led) next to the button lights up green when it is selected.
Room blocking: By pressing a room button for 2 seconds, the indicator next to it will light up red. This means
this zone is blocked for paging. Press the same button again for 2 seconds to release the 'block' situation.
2. MESSAGE BUTTONS – One can page a pre-recorded message by first selecting the required room(s)
followed by pressing the appropriate message button. To stop a playing message, one should press
the same message button again. The paging function still has a higher priority: during a pre-recorded
message anouncement the microphone can be used to override this message.
This function is only available if the optional message storage card is installed and pre-recorded messages
are stored on this card.
3. SELECT ALL BUTTON – By pressing the 'select all' button all rooms are selected (except the blocked rooms).
4. DESELECT ALL BUTTON – By pressing the 'deselect all' button all rooms are deselected.
5. TALK BUTTON – After pressing the talk button the indicator just above this button lights up red, at the same
time a chime signal is activated and routed the selected rooms. As soon as this indicator turns green one can
page a live spoken message, as long as the button is pressed. Releasing this button will stop the paging.
2
4
5
3. System control
11