Bose Panaray 502A Kurulum Kılavuzu - Sayfa 21
Stereo sistemi Bose Panaray 502A için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Bose Panaray 502A 24 sayfaları. Full-range-driver array loudspeakers
Ayrıca Bose Panaray 502A için: Teknik Bilgiler (4 sayfalar), Kurulum Kılavuzu (12 sayfalar), Manuel (4 sayfalar), Kurulum Kılavuzu (32 sayfalar)
Sayfayı Yazdır
- 1. Panaray Series IV Loudspeaker Dimensions
- 2. Panaray ® 802 ® Series IV Loudspeaker U-Bracket
- 3. Panaray ® 802 ® Series IV Loudspeaker Mounting Options
- 4. Installation
- 5. Recommended Power Amplifiers
- 6. Recommended Dsp Settings
- 7. Panaray 802 Series IV Loudspeaker Specifications
- 8. Panaray 502 a Series Loudspeaker Specifications
pro.Bose.com
Panaray
402
Series IV Loudspeaker Specifications
®
®
System Performance
Frequency Range (-10 dB)
(1)
Recommended High-Pass Protection Filter
Nominal Coverage Pattern
Loudspeaker EQ
Overload Protection
Power Handling, long-term continuous
Power Handling, peak
Sensitivity (SPL / 1 W @ 1 m)
Calculated Maximum SPL @ 1 m
Calculated Maximum SPL @ 1 m, peak
Transducers
Full-range Drivers
Nominal Impedance
Physical
Enclosure Material
Grille
Environmental
Connectors
Suspension / Mounting
Dimensions (H xW xD)
Net Weight
Shipping Weight
Product Code
Black
White
Notes:
1. Frequency range measured on-axis with recommended EQ in an anechoic environment.
2. Bose extended-lifecycle test: pink noise, IEC268-5 filtered, 6-dB crest factor, 100-hour duration, with recommended EQ.
3. AES component test: pink noise, IEC268-5 filtered, 6-dB crest factor, 2-hour duration, with recommended EQ.
4. Sensitivity measured in anechoic acoustic boundary conditions with recommended EQ, referenced to 1 W/m.
5. Maximum SPL calculated from sensitivity and power handling specifications, exclusive of power compression.
For additional specifications and application information, please visit pro.Bose.com. Specifications subject to change without notice.
Bose extended-lifecycle test
(4)
(5)
Panaray
402
®
®
73 Hz – 15 kHz
75 Hz with minimum 12 dB / octave filter
120° H x 60° V
active EQ required for optimal performance
power limiting circuit (non-fused; automatic reset)
(2)
120 W
480 W
Free field
91 dB
112
118
4 x Bose 4.5-inch (114 mm) full-range cone transducers
8 ohms
mineral-reinforced HDPE
power-coated steel grille
outdoor per IEC 529 IP55
2 x Neutrik
NL4 wired parallel
®
7 x M8 threaded inserts (4 back, 2 bottom, 1 top)
592 mm x 206 mm x 202 mm (23.3" x 8.1" x 8.0")
7.3 kg (16 lb)
9.1 kg (20 lb)
739706-0110
739706-0210
Technical Information
Series IV
AES component test
(3)
150 W
600 W
Free field
91 dB
113
119
21