Bose Solo 10 series II Önemli Güvenlik Talimatları Kılavuzu - Sayfa 12
Stereo sistemi Bose Solo 10 series II için çevrimiçi göz atın veya pdf Önemli Güvenlik Talimatları Kılavuzu indirin. Bose Solo 10 series II 20 sayfaları. Tv sound system
Ayrıca Bose Solo 10 series II için: SSS (3 sayfalar), Servis Kılavuzu (40 sayfalar)
Sayfayı Yazdır
Using the System
Optional Solo 15 series II system
universal remote control
Bose offers the Solo 15 series II system universal remote control for
separate purchase. Contact Bose Corporation or your local dealer
for more information. Refer to the contact sheet in the carton.
Programming a non-Bose
remote control
You can program a non-Bose remote control, such as your
cable/satellite box remote, to control the system. Refer to your
non-Bose remote control's owner's guide or cable/satellite website
for instructions.
Once programmed, the non-Bose remote performs basic functions
such as power on/off and volume.
Adjusting the volume
On the remote control:
• Press + to increase the volume.
• Press – to decrease the volume.
• Press
to mute or unmute the audio.
Note: If you hear sound coming from your TV, see "Troubleshoot-
ing" on page 18.
Adjusting the bass level
1.
Press the Bass button (
The status indicator blinks white three times.
2.
On the remote control:
• Press
to increase the bass.
• Press
to decrease the bass.
3.
Press the Bass button (
The status indicator blinks white three times and the system
saves your settings.
Note: For optimal sound quality for dialogue-only programs, such
as news and talk shows, see "Dialogue mode".
Resetting the bass level
On the remote control, press and hold
reset the bass level to original factory settings.
12 - English
).
).
for five seconds to
Dialogue mode
Dialogue mode provides optimal sound quality for dialogue-only
programs, such as news and talk shows, by decreasing the
system's bass settings.
On the remote control, press the dialogue button ( ) to toggle
between dialogue mode and your default audio settings.
The status indicator glows amber when dialogue mode is enabled.
Auto-wake
You can set the system to power on whenever a sound signal
is received.
Note: The system powers off after 60 minutes of inactivity.
On the remote control, press and hold
between auto-wake and default power settings.
The status indicator glows dim amber when the system is off and
auto-wake is enabled.
for five seconds to toggle