Function
To view number of tracks and total play time -
Press Stop I and then press CD Play/Pause
The display momentarily shows the total number of
tracks and playing time of a CD.
To automatically play the radio when a CD ends -
Select the desired radio station. Press and hold the
CD Play/Pause
button. While holding the CD
Play/Pause button
, press and release the AM or
FM button. The display flashes AM or FM to confirm
your choice.
Current track number or
Figure 10
total number of tracks
The CD display
Note: To prolong laser life, the CD player automatically turns off after 8
hours of continuous play. Also, if a CD is left unattended in pause mode,
the system automatically turns off after 30 minutes.
Listening to a component connected to AUX
You can use your Acoustic Wave
sound from an external source connected to the rear panel AUX inputs. See
"Connecting external components to the system" on page 14 for informa-
tion on connecting other sources.
1. Turn on the external source.
2. Press the AUX button on the Acoustic Wave
and turn on the system. If the system is already on, just press AUX. The
display should show "AUX" and the VOLUME level (Figure 11).
3. Adjust the volume of the source using the Volume L or M buttons.
Control all other source functions at the external component. If neces-
sary, refer to the owner's guide for the external component.
Figure 11
The AUX display
AM253543_03_V.PDF
Operating Your Acoustic Wave
CD Play/Pause
Stop
Control panel
.
Stop
FM
CD play indicator
TRACK
CD
RANDOM
®
music system to produce room-filling
AUX
VOLUME
October 16, 2001
®
Music System
On
Seek
Tune
Off
TRACK
AUX
VOLUME
MUTE
CD
FM
AM
FM
STEREO
PRESET
REPEAT TRACK
Volume
REPEAT DISC RANDOM
Presets
AM
1
2
3
4
5
FM
AM
Mute
AUX
Volume
Seek/Tune
Acoustic Wave Music System
AUX
On/Off
Skip/Scan
CD Mode
CD
Skip
Scan
Acoustic Wave Music System
Remote control
CD Play/Pause
CD Play/Pause
AM
Elapsed or total
playing time
Current disc
play mode
®
system to select the source
1
2
3
4
5
Presets
FM
AM
13
Sayfayı Yazdır