Bose Acoustimass 5 Series III Kullanıcı El Kitabı - Sayfa 12
Medya Dönüştürücü Bose Acoustimass 5 Series III için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Bose Acoustimass 5 Series III 22 sayfaları. Bose lifestyle amplifier user's guide am262840
Ayrıca Bose Acoustimass 5 Series III için: Kullanıcı El Kitabı (29 sayfalar), Kullanıcı El Kitabı (16 sayfalar)
Sayfayı Yazdır
Setting Up Your Lifestyle
Figure 9
Setting up a Zone 2 remote
control
Figure 9a
Setting Zone 2 Protocol
10
®
Stereo Amplifier
Setting up the remote control
You need to set up a second remote control to operate the ZONE 2 output.
1. Remove the remote control battery cover and locate the miniature switches (Figure 9).
2. Make sure that the house code settings (switches 1, 2, 3, and 4) match those in your first remote.
3. Make sure switches 5, 7, and 8 are up, and switches 6 and 9 are down.
Note: Refer to your Lifestyle
®
than one room.
ON
Setting Zone 2 Protocol
For the SA-1 amplifier to work properly with a Lifestyle
col to Legacy mode (Figure 9a).
1. While your Lifestyle
®
DVD system is on, press the Settings button on your remote control. This will open
the on-screen display.
2. Scroll down with the down-arrow button and select System Setup using the enter button.
3. You will now see a menu entitled System Setup (1 of 3). Scroll down to "more...". Continue to scroll down
through (2 or 3) to (3 of 3). The last item on System Setup (3 of 3) is Zone 2 Protocol.
4. Use the right-arrow button to change the protocol from Normal to Legacy.
5. Before using Zone 2, shut off the system and turn it on again; this ensures that the Zone 2 Protocol is
reset to Legacy mode.
On
Mute
Mute
Off
All
SOURCE / INPUT
CD/DVD
Changer
FM/AM
TV
VCR
AUX
Settings
MENU / NAVIGATION
Settings
Tune
Disc
Seek
Enter
Channel
Chapter
Volume
Preset
Track
1
2
3
4
5
6
7
8
9
0
PLAYBACK
Stop
Pause
Play
Shuffle
Repeat
January 4, 2002
system owner's guide for more information on operating your system in more
®
media center, you will need to set the Zone 2 Proto-
Settings ( )
System Setup
Enter
System Setup (3 of 3)
Zone 2 Protocol:
Legacy
AM262840_00_V.pdf