Bose AM193147_03_V. Kullanıcı El Kitabı - Sayfa 23

Medya Dönüştürücü Bose AM193147_03_V. için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Bose AM193147_03_V. 34 sayfaları. Bose lifestyle 30 system owner's guide am193147_03_v.pdf

Sayfayı Yazdır

CAUTION:

The magnetic field from the

Acoustimass

module is not

an immediate risk to your

video tapes, audio tapes, and

other magnetic media.

However, you should not store

tapes directly on or near the

Acoustimass module.

Figure 28

Connecting headphones

AM193147_03_V.pdf

Using the system with external components

Follow the instructions on pages 10-12 for connecting components.

Turn on your component directly or by using its remote control. Use the VOLUME

key on the Lifestyle

remote control or music center to raise or lower the volume. Control all

other functions at the source, referring to its owner's manual, if necessary. To begin, make

sure the component is turned on and a tape, CD, DVD, laserdisc, etc. is loaded.

Note: The Lifestyle

30 system cannot turn a connected component on or off.

Turning the system on and selecting the component

Press the TAPE, AUX, VIDEO 1, or VIDEO 2 key on the remote or press SOURCE SELECT

on the music center until the desired component is selected. This turns your system on and

selects the component connected to that input. If the system is already on, this key selects

the component.

Note: Selecting TAPE or AUX turns the system on in STEREO (2-speaker) mode. Selecting

VIDEO 1 or 2 turns the system on in SURROUND (5-speaker) mode. Press SURROUND

(5-speaker), STEREO+CENTER (3-speaker), or STEREO (2-speaker) to change the mode.

The appropriate display indicator lights when the system is on and the component is

selected.

Using a video sound source

Press VIDEO 1 or VIDEO 2 on the remote or SOURCE SELECT on the music center until

VIDEO 1 or 2 appears on the display. This turns your system on in SURROUND mode and

selects the video sound source connected to the VIDEO 1 or 2 jacks. If the system is

already on, this key selects the component and SURROUND mode.

If your video component is connected to the music center AUX or TAPE jacks, press AUX or

TAPE on the remote or SOURCE SELECT on the music center to select the component.

This turns your system on in STEREO mode. Press SURROUND to select 5-speaker mode.

Using enhanced bass for movie soundtracks

Pressing VIDEO 1 or VIDEO 2 turns the system on in enhanced bass mode, a bass level

specially designed for proper playback of movie soundtracks. Press VIDEO 1 or 2 again to

alternate between enhanced bass for movies and standard bass for other listening.

Pressing AUX or TAPE turns the system on in standard bass mode. Press AUX or TAPE

again to alternate between standard bass for other listening and enhanced bass for movies.

Note: You may not hear a difference between enhanced and standard bass when listening

to movie soundtracks that do not have much very low bass content.

Using a tape deck

To record to a connected tape deck, play the source (AM/FM, CD, AUX, VIDEO 1 or 2) you

want to tape. In a 2-zone system, play the source in zone 1. Set the tape deck to record.

Using headphones

December 20, 2001

Operating Your Lifestyle

For headphone listening, use the

stereo mini headphones jack on the

side of the music center (Figure 28).

While this jack accepts most head-

phone models, you can get an adapter

at Bose

dealers and most electronics

stores, if needed.

Connecting headphones silences the

speakers connected to SPEAKER

ZONE 1.

30 System