Bose Lifestyle 40 Kullanıcı El Kitabı - Sayfa 20

Medya Dönüştürücü Bose Lifestyle 40 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Bose Lifestyle 40 48 sayfaları. Bose lifestyle amplifier user's guide am262840
Ayrıca Bose Lifestyle 40 için: Kullanıcı El Kitabı (22 sayfalar)

Sayfayı Yazdır

1. Connecting Your System

Operating Your Lifestyle

Listening to the radio

Figure 20

Tuning the radio from the FM

source display

40 Music System

Your Lifestyle

music system has a built-in AM/FM radio. Good AM/FM radio reception

depends on the location and orientation of the AM and FM antennas. See "FM antenna

connections" and "AM antenna connections" on page 12 for proper antenna installation. See

"Optimizing AM/FM radio reception" on page 28 for help with antenna adjustment.

Turning the system on and choosing the radio

Press FM or AM to turn your system on to the most recently selected FM or AM station. If the

system is already on, use the FM or AM button to select either of these sources.

Setting radio channel spacing

On some multi-room interfaces, the AM and FM channel spacing can be set for North

America (US: 10 kHz for AM and 200 kHz for FM) or Europe (EU: 9 kHz for AM and 50 kHz for

FM). Select the channel spacing most appropriate for your area.

To change between US and EU channel spacing, press and hold the SOURCE button for two

seconds. Press either arrow button until tunr appears. Using the arrow buttons, select US or

EU. Press DONE to exit.

Selecting FM or AM

Press the FM or AM SOURCE button to turn on the radio band desired. Select a station by

tuning manually, seeking a strong station, or selecting a preset station.

Manually tuning a radio station

To manually tune a radio station, press the

either side of the frequency display to change the frequency in small steps (Figure 20). Or,

press the KEYPAD button until the indicator arrow

number buttons to enter the frequency of the station you want to tune. The left-most digit is

entered first and the display flashes while you enter more digits. When you have entered the

station frequency, the system selects that station or the closest valid station.

To tune a station, use up/down arrow keys, or

Receiving FM stereo or monaural broadcasts

When receiving sufficiently strong FM stereo broadcast signals, the radio automatically

receives in the stereo mode; the STEREO indicator appears on the display. Weak stereo

signals are received in the monoaural mode (the STEREO indicator is off).

To force the tuner to receive in stereo mode only, press and hold the center of the station

display until you hear a high-pitched beep. To receive in monaural mode only, press and hold

until you hear a low-pitched beep. However, even though you may have forced the stereo

mode, monaural broadcast material is still heard in monaural. Retuning the station cancels

any forcing.

December 20, 2001

(decrease) or

(increase) arrow button on

points toward TUNE. Then use the

point the KEYPAD to TUNE and enter numbers.

AM189858_03_V.pdf